Kooks vs ARH
Melting Slicks
Joined: Oct 2022
Posts: 3,341
Likes: 1,935
From: Ulta Vista, AZ
I have never had problems with Kooks either, but neither ARH.
ARH specifically says their collector design can make it a smidge tighter than the other guys, but the clearance is a non issue.
Mine are 1.75 though, so maybe that helped me.
ARH specifically says their collector design can make it a smidge tighter than the other guys, but the clearance is a non issue.
Mine are 1.75 though, so maybe that helped me.
Supporting Vendor
Joined: May 2018
Posts: 5,256
Likes: 418
From: Philadelphia
It's very subjective honestly - some like wrap, some like coatings
If you're going to do it, I'd have them coated by Swaintech but that can void some mfg's warranty.
I've ran my ARH headers bare on my C6Z for many years with no issues. Would definitely recommend shielding the starter while you're in there
If you're going to do it, I'd have them coated by Swaintech but that can void some mfg's warranty.
I've ran my ARH headers bare on my C6Z for many years with no issues. Would definitely recommend shielding the starter while you're in there
__________________
Alec @ Forza Motor Works
info@forzamotorworks.com
www.forzamotorworks.com
Your trusted source for premium parts - offering competitive pricing, exceptional service, and professional installation options.
Corsa | Borla | AWE Tuning | Girodisc | Halltech | American Racing Headers | Milltek | Soler | Weld | Fabspeed | SOUL | Kooks | BC Forged & 100's more!
Alec @ Forza Motor Works
info@forzamotorworks.com
www.forzamotorworks.com
Your trusted source for premium parts - offering competitive pricing, exceptional service, and professional installation options.
Corsa | Borla | AWE Tuning | Girodisc | Halltech | American Racing Headers | Milltek | Soler | Weld | Fabspeed | SOUL | Kooks | BC Forged & 100's more!
