Power steering pump bracket
Thread Starter
Drifting
Joined: Jul 2003
Posts: 1,868
Likes: 294
From: West of Burlington, Ontario Canada
Power steering pump bracket
If anyone has a bad LS9 power steering pump bracket P/N 12625875 that I can buy, i have a foundry and machine shop willing to try to make them as these are discontinued and there are no aftermarket options. I'm willing to pay a reasonable price for the bad one but can't guarantee how long it will take and to get a final price. I believe to make it worth while for making these I'll have to make at least 50 of them. I'm sure they will sell if I can keep the cost reasonable. Let me know!
Last edited by GMJim; Dec 14, 2025 at 05:37 PM.
Thread Starter
Drifting
Joined: Jul 2003
Posts: 1,868
Likes: 294
From: West of Burlington, Ontario Canada
Nobody to my knowledge has one. What's wrong with yours? If it's damaged and you're willing to part with it, I'm planning to try to reproduce them but I need one to disassemble and duplicate. My plan is to make the only failing part, the bearing, much more robust to avoid future problems. Let me know.
Last edited by GMJim; Dec 26, 2025 at 09:02 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Safety Car
Joined: Apr 2007
Posts: 4,464
Likes: 326
From: Houston TX
I applaud your efforts, but might I suggest instead to use 3D scanning/modeling, print in plastic to test/refine and get it printed out of metal for the final product? I bet that would be significantly cheaper the the foundry/machine shop route.
