When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Would be nice to see a comparison of some different width spacers installed. 20mm does seem common from what I've seen but 12.5mm seems like a good compromise too.
I went with 1/4" on the front and RR and 3/8" on the left rear. Yes, the rear cradle was manufactured off to one side. Drives me crazy.
I have gone to shank style lugs to catch a couple extra threads. Not perfect but better.
I went with 1/4" on the front and RR and 3/8" on the left rear. Yes, the rear cradle was manufactured off to one side. Drives me crazy.
I have gone to shank style lugs to catch a couple extra threads. Not perfect but better.
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.
