When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
VNM Now Has The "BackBone 2" for The C-6 Stainless Steel and Ceramic coated 1/8" thick now available Only Through our Authorized distributor Nate Caro and the Corvette Garage Call Nate for pricing and to place your order. Quality ride Guarenteed. S/S Plate is 13 Lbs vs. the stock at 4.5 lbs same thickness double stiffness... VNM Performance products (800)979-4866
Last edited by 30yeardream; Nov 22, 2004 at 04:19 AM.
strange.....i have no idea what you're talking about...you never say what it is......guessing, i figured it was about a new, aftermarket header....spent a couple of minutes scrolling up and down the banner list to find this outfit, but couldn't.....didn't see it under the "Header" listing....or anywhere else for that matter.....
strange.....i have no idea what you're talking about...you never say what it is......guessing, i figured it was about a new, aftermarket header....spent a couple of minutes scrolling up and down the banner list to find this outfit, but couldn't.....didn't see it under the "Header" listing....or anywhere else for that matter.....
i give.....what is it?
I thought the same thing at first, but then saw it say "a quality ride guaranteed" and thought it must be a supension item. But that makes no sense either.
Might want to make it a little more clear what we are talking about here.
I thought the same thing at first, but then saw it say "a quality ride guaranteed" and thought it must be a supension item. But that makes no sense either.
Might want to make it a little more clear what we are talking about here.
I thought the same thing at first, but then saw it say "a quality ride guaranteed" and thought it must be a supension item. But that makes no sense either.
Might want to make it a little more clear what we are talking about here.
Sorry Guys. Figured you were ex C-5 owners and followed the Parts for Sale section there. The BackBone2 is the C-6 Version of the torque Tube Tunnel Chassis Stiffener. It is like the C-5 Version pictured at www.vettesnmore.com It improves the already nice ride we have on these cars. 1/8th inch Stainless Steel instead of the 1/8th inch aluminum stock plate. You will enjoy a stiffer ride and better drivability. Check out the web page. Corvette Garge is right below TTP and above Davinci in the Vendor banner side bar. Sorry Mark
I just put Mark's Backbone on my 2004 c-5 vert, and it really makes a difference, especially as a convertible. I live in Connecticut and the roads aren't the best. The car is much more "composed" when it gets rough, and there is much less cowl shake and bounce. This is a very good mod.
I had the Backbone installed on my C6 and could tell a noticable difference in the way the car performed during hard acceleration. Less torque twist and the car seems to track better when cornering hard.