C6 Alky Control Methanol Injection Systems | JDP Motorsports
#1
Former Vendor
Thread Starter
C6 Alky Control Methanol Injection Systems | JDP Motorsports
JDP Motorsports is proud to offer, use and install Alky Control Methanol Injections systems!
With the flood of Injection systems on the market today, A little research and you will notice that most if not all provide systems based on a 50/50 mix, This is due in part to the higher cost of internal as well as external parts needed to hold up to 100% "safely". A perfect example is type of hoses used.
When you purchase an Injection system from Alkycontrol your getting a product thats been tested time and time again by some of the fastest out there, be it cars, trucks, jet skis, airboats, and even a world record holding airplane. If it has a piston/rotor on boost, it will benefit from our injection system.[SIZE="3"]
Alky Control - Methanol Injection System - 2005-2013 Corvette - AK-C6-Kit[/SIZE]
The Alky Control Methanol Injection system for the C6 Corvette/Z06/ZR1 features a boost referenced, progressive meth controller which automatically releases increasing amounts of methanol as boost increases. This progression ensures smooth and even fuel delivery so that the transition or power remains smooth all the way up to redline. Alky Control Systems use only the best components. Braided Stainless Steel Lines, a High Volume Methanol specific pump, sealed electrical connectors and brass fittings.
Methanol is a highly effective addition for your force induced car for a number of reasons. First, Methanol injection is a highly efficient chemical intercooler. By injecting methanol into the inlet of a supercharged car, intake air temperatures (IATs) can be reduced by more than 80% (depending on ambient air temperatures) and allow your tuner to run more timing and therefore making more HP. Secondly, Methanol burns at the equivalent of 110 octane fuel, effectively halting detonation that can be present with lower octane fuels. Methanol works to keep your engine cleaner, and helps remove carbon deposits that can form on the pistons, which can effective change engine compression and combustion properties.
Features
ORDER HERE[/SIZE]
Please feel free to call, PM or email us anytime with questions. Our Expert staff will be happy to assist you in choosing the best options to suit your application.
Best regards,
Tyler
801.545.4215
sales@jdpmotorsports.com
With the flood of Injection systems on the market today, A little research and you will notice that most if not all provide systems based on a 50/50 mix, This is due in part to the higher cost of internal as well as external parts needed to hold up to 100% "safely". A perfect example is type of hoses used.
When you purchase an Injection system from Alkycontrol your getting a product thats been tested time and time again by some of the fastest out there, be it cars, trucks, jet skis, airboats, and even a world record holding airplane. If it has a piston/rotor on boost, it will benefit from our injection system.[SIZE="3"]
Alky Control - Methanol Injection System - 2005-2013 Corvette - AK-C6-Kit[/SIZE]
The Alky Control Methanol Injection system for the C6 Corvette/Z06/ZR1 features a boost referenced, progressive meth controller which automatically releases increasing amounts of methanol as boost increases. This progression ensures smooth and even fuel delivery so that the transition or power remains smooth all the way up to redline. Alky Control Systems use only the best components. Braided Stainless Steel Lines, a High Volume Methanol specific pump, sealed electrical connectors and brass fittings.
Methanol is a highly effective addition for your force induced car for a number of reasons. First, Methanol injection is a highly efficient chemical intercooler. By injecting methanol into the inlet of a supercharged car, intake air temperatures (IATs) can be reduced by more than 80% (depending on ambient air temperatures) and allow your tuner to run more timing and therefore making more HP. Secondly, Methanol burns at the equivalent of 110 octane fuel, effectively halting detonation that can be present with lower octane fuels. Methanol works to keep your engine cleaner, and helps remove carbon deposits that can form on the pistons, which can effective change engine compression and combustion properties.
Features
- PAC Progressive controller
- Modified pump (for methanol)
- Stainless braided hoses pre-assembled
- Complete Harness w/everything needed
- 2 Bar GM MAP sensor with regulator
- Includes Installation Instructions with Tuning Tips
- 1 Year Parts and Labor Warranty
- Dual Nozzle for 650+ RWHP
- GM IAT Sensor Upgrade with everything needed (Better and safer tuning solution*)
ORDER HERE[/SIZE]
Please feel free to call, PM or email us anytime with questions. Our Expert staff will be happy to assist you in choosing the best options to suit your application.
Best regards,
Tyler
801.545.4215
sales@jdpmotorsports.com
Last edited by JDP Tech; 07-30-2018 at 11:51 AM.
#2
Former Vendor
Thread Starter
If you're boosting, you are losing power to high IAT's. Keep your inlet temps cool with this excellent kit!
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
888.308.6007
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
888.308.6007
#4
Former Vendor
Thread Starter
Thanks for the orders and support, Corvette Forum!!
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
888.308.6007
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
888.308.6007
#5
Former Vendor
Thread Starter
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
801.545.4215
#6
Former Vendor
Thread Starter
Feel free to call, PM or email us with any questions about any of our products! We appreciate your support and have a great weekend!
Best regards,
Kayla L.
801.545.4215
Best regards,
Kayla L.
801.545.4215
#7
Former Vendor
Thread Starter
Want the best of the best? Look no further then to the GM specialist at JDP Motorsports . We know the in's and out's of these beast and know how to take your car where you want it! Feel free to call, email or PM us at any time.
Best regards,
Kayla L.
801.545.4215
Best regards,
Kayla L.
801.545.4215
#9
Former Vendor
Thread Starter
We got what you need. Whether it’s a little HP or a lot we got you covered . Give us a call or PM us at any time.
Best regards,
Kayla L.
801.545.4215
Best regards,
Kayla L.
801.545.4215
#10
Former Vendor
Thread Starter
Still at a great price! Give us a call and we'll get you dialed in :thumb:. We appreciate your support in our product! Have a great day!
Best regards,
Kayla L.
801.545.4215
Best regards,
Kayla L.
801.545.4215
#11
Former Vendor
Thread Starter
Alky is the only meth kit we trust on our cars. Great quality and a strong system that won't disappoint. Have a great Easter weekend everyone .
Best regards,
Kayla L.
801.545.4215
Best regards,
Kayla L.
801.545.4215
#12
Former Vendor
Thread Starter
Friday bump back to the top! Have a great weekend guys! Let us know if you have any questions about any of our products!
Cheers!
Kayla L.
801.545.4215
Cheers!
Kayla L.
801.545.4215
#13
Former Vendor
Thread Starter
Hump day bump ! The weekend is so close you can almost taste it! Let us know if you need any parts for your weekend project .
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#14
Former Vendor
Thread Starter
Lets hope this week go's by fast so we can enjoy one last ride before hibernation .
If you are planning on working on your car this winter let us know what you need or if you have any questions! Feel free to call,PM or email us at any time!
Cheers,
Kayla L.
801.545.4215
If you are planning on working on your car this winter let us know what you need or if you have any questions! Feel free to call,PM or email us at any time!
Cheers,
Kayla L.
801.545.4215
#15
Former Vendor
Thread Starter
It's finally Friday! We made it through the week and now it's time for some weekend fun . Let us know if you have any questions about any of our products!
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#17
Former Vendor
Thread Starter
Even though it's Monday we are here to help you with your car part needs! Let us know if there is anything you need .
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#18
Former Vendor
Thread Starter
While our website is updating please feel free to call, PM or email us what item you would like and we will get you pricing . We apologize for the inconvenience and appreciate your support!
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215