Meth pump fuse issues
#1
Melting Slicks
Thread Starter
Member Since: Dec 2008
Location: Mount Airy NC
Posts: 2,073
Received 560 Likes
on
379 Posts
C7 of Year Finalist (performance mods) 2019
Meth pump fuse issues
Started having this problem a week or so ago. My meth pump(alky control) started blowing the 20amp fuse off the battery to the relay. I double checked all my wiring and it is fine. Tested the relay and it checks out with proper resistance. I replaced it today again and it blew While driving with out boost with in several minuets. From what I have read the the pump at 200psi should only draw 10 amps. As a note I do have my Wideband on the same relay source, but it should only draw 2.2 amps max. Any ideas?
Thanks!
Thanks!
Last edited by chefcg1; 01-22-2017 at 05:31 PM.
#2
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
Started having this problem a week or so ago. My meth pump(alky control) started blowing the 20amp fuse off the battery to the relay. I double checked all my wiring and it is fine. Tested the relay and it checks out with proper resistance. I replaced it today again and it blew While driving with out boost with in several minuets. From what I have read the the pump at 200psi should only draw 10 amps. As a note I do have my Wideband on the same relay source, but it should only draw 2.2 amps max. Any ideas?
Thanks!
Thanks!
#3
Melting Slicks
Thread Starter
Member Since: Dec 2008
Location: Mount Airy NC
Posts: 2,073
Received 560 Likes
on
379 Posts
C7 of Year Finalist (performance mods) 2019
Totally unhook the wideband from that source you really don't need it anyway too just see it that is your problem that may be bad and pulling more amps. If it has a 20 amp in it now don't put a 30 amp in it. Need to find the problem. Plus how long has your wideband been hooked up now on the car. Robert
#4
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
Just undo it and put a new 20 amp and see what happens has to be man. All this stuff in these car if something crazy happens like this just have to really chg one thing at a time and work your way out from the easiest to the hardest. Elec crap is also the worse. Robert
Last edited by robert miller; 01-22-2017 at 08:40 PM.
#5
Melting Slicks
Thread Starter
Member Since: Dec 2008
Location: Mount Airy NC
Posts: 2,073
Received 560 Likes
on
379 Posts
C7 of Year Finalist (performance mods) 2019
That was my plan. I planed on running a dedicated relay anyway as I'm working on a A-pillar pod with a vendor ( more info on that to come in near future).
#6
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
I am wanting a two pod A pillar set for the car. Please message me the vendor so I can call him to get one also. I am not going to cut holes and put stuff That will be a pain to get out and have to replace to put back to stock. Robert
#7
Melting Slicks
Thread Starter
Member Since: Dec 2008
Location: Mount Airy NC
Posts: 2,073
Received 560 Likes
on
379 Posts
C7 of Year Finalist (performance mods) 2019
Pm'ed you the info. I should have my donor A-pillar here in a day or 2 and then off to the vender. Really don't want to say much more until I see the results. At that time I'll do a dedicated post sharing my results and info on how to order.
The following users liked this post:
robert miller (01-23-2017)