C7 and Trans/ Motor
Tech Contributor
Joined: Oct 1999
Posts: 41,055
Likes: 9,817
From: Charlotte, NC (formerly Endicott, NY)
Rear fascia view shows a small port low on the left side. Wonder if that is for placement of a tow hook? If so I wonder if there is something similar in the front. Interesting how they used the two cast sections in the frame.
It looks like they finally got the C5 and C6 design issues with the wheel wells resolved. No more paint in the wheel wells to get sand blasted within the first 200 miles of driving the car. There should be much less road rash damage to the lower doors and rear fender but the rockers are still exposed especially where they sweep out in the rear.
Bill
It looks like they finally got the C5 and C6 design issues with the wheel wells resolved. No more paint in the wheel wells to get sand blasted within the first 200 miles of driving the car. There should be much less road rash damage to the lower doors and rear fender but the rockers are still exposed especially where they sweep out in the rear.
Bill
Last edited by Bill Dearborn; Jan 17, 2013 at 12:33 PM.
