's !! 
Exhaust material
Le Mans Master
Joined: Dec 2006
Posts: 5,139
Likes: 482
From: H-Town Texas
I'm sorry, but I have to call B.S. on this. In the name of due diligence, I looked at a number of pics posted in here. The fact is this, in order to see what you claimed to see, you would have to get down on the ground, with a flashlight to see where the tips are attached to the muffler. Perhaps you can dig up the vid you saw, because I can't find it.
Scraping the splitter.
Joined: Jun 2005
Posts: 8,111
Likes: 1,029
St. Jude Donor '13-'14-'15
Le Mans Master
Joined: May 2010
Posts: 7,756
Likes: 173
From: Ventura CA
Damn right I'm serious, the Vette rotor's rust like crap, same for the rotor hats. It is embarrassing!
My 03 Cobra rotor/brakes never showed a spot of rust. Do you really think for 55-60k you are getting the best materials? Maybe it is you that is
My 03 Cobra rotor/brakes never showed a spot of rust. Do you really think for 55-60k you are getting the best materials? Maybe it is you that is
Instructor
Joined: May 2013
Posts: 139
Likes: 0
I found it. I was off on a few details - like the white pants are actually tan shorts but oh well.
The time in the video when whoever is filming it gets down to show the exhaust is 36 seconds in. Ignore the tips and look behind them, there's some sort of discoloration where they connect.
The time in the video when whoever is filming it gets down to show the exhaust is 36 seconds in. Ignore the tips and look behind them, there's some sort of discoloration where they connect.
Drifting
Joined: Jun 2013
Posts: 1,472
Likes: 33
From: Billings Montana
I don't think it is weld...maybe exhaust heat is discoloring it, the stainless exhaust on my KTM 990 SMT, is slowly changing to a dull copper color due to the effects of the heat.
Le Mans Master
Joined: May 2010
Posts: 7,756
Likes: 173
From: Ventura CA
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Dec 2006
Posts: 5,139
Likes: 482
From: H-Town Texas
My first thought as well. Though it's also not a big stretch to think they went with a cheap weld, knowing the car will be going to the crusher in a couple of months.