Missing door sills?
#83
Team Owner
Member Since: Sep 2005
Location: Big Bend Country, TX
Posts: 29,114
Received 2,186 Likes
on
1,337 Posts
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15- '16-'17-‘18-‘19-'20-'21
NCM Lifetime Member
#86
Instructor
#87
Le Mans Master
You shouldn't add any words, in this case (jackhall) to another CF member's comments when you "quote" them. That is putting words in their post that they did not use.
Here is the chain of posts. You should learn to read the thread and take the posts in proper context.
You have the right to believe and state I am "like a negative farm of crappola all the time", but lottavettes was agreeing with my comment on b4i4getit's post.
I have opinions also, and will state my case based on facts as I know them to be regarding the broad topic or specific point under discussion. I really do not believe I was negative in this thread other than calling bull-**** when appropriate.
Enjoy your day.
Here is the chain of posts. You should learn to read the thread and take the posts in proper context.
I guess GM figures that they can ship the car and let the dealer worry about it. How far will the plant go ? We ran out of the proper wheels and tires but we will still ship the car ? No magnetic shocks so install the standard ones ? That sucks for quality.
I have opinions also, and will state my case based on facts as I know them to be regarding the broad topic or specific point under discussion. I really do not believe I was negative in this thread other than calling bull-**** when appropriate.
Enjoy your day.
#89
Instructor
Sill plates
Car arrived today and missing sill plates. No where to be found.
Dealer has notified GM and ordered them. They were supposed to be the upgraded Stingray type.
Also strange, carbon fiber interior appearance package was originally ordered (July 12) and then taken off (July 15) when Chevrolet notified dealer the CB was on constraint. Well, the car came in with the CB interior package, go figure.
All in all I figure I came out ahead.
Dealer has notified GM and ordered them. They were supposed to be the upgraded Stingray type.
Also strange, carbon fiber interior appearance package was originally ordered (July 12) and then taken off (July 15) when Chevrolet notified dealer the CB was on constraint. Well, the car came in with the CB interior package, go figure.
All in all I figure I came out ahead.
#90
I mentioned the missing door sill phenomenon to my dealer today and got a very logical explanation that fits with the above post. If you order the "STINGRAY" sills, they are LPO, dealer installed options and the car is shipped without door sills in anticipation of the dealer placing the sills during PDI. The fact that the STINGRAY sills aren't yet widely available is a different kettle of fish. My dealer preordered enough far enough ahead of time to have them on hand for their LPO's.
#91
Race Director
Member Since: Sep 2013
Location: Ft Lauderdale
Posts: 10,531
Received 1,062 Likes
on
542 Posts
Tech Contributor
I mentioned the missing door sill phenomenon to my dealer today and got a very logical explanation that fits with the above post. If you order the "STINGRAY" sills, they are LPO, dealer installed options and the car is shipped without door sills in anticipation of the dealer placing the sills during PDI. The fact that the STINGRAY sills aren't yet widely available is a different kettle of fish. My dealer preordered enough far enough ahead of time to have them on hand for their LPO's.
#92
Le Mans Master
Member Since: Oct 2004
Location: Haymarket Virginia
Posts: 8,615
Likes: 0
Received 56 Likes
on
30 Posts
Dealer ordered them and should have them by now.
OP did not order those.
I mentioned the missing door sill phenomenon to my dealer today and got a very logical explanation that fits with the above post. If you order the "STINGRAY" sills, they are LPO, dealer installed options and the car is shipped without door sills in anticipation of the dealer placing the sills during PDI. The fact that the STINGRAY sills aren't yet widely available is a different kettle of fish. My dealer preordered enough far enough ahead of time to have them on hand for their LPO's.
#93
Corvette fan
I ordered the Stingray sill plates and center wheel caps. My dealer told me that they would install the Stingray items and that I would get the original caps and sills in a box.
Perhaps there's a misunderstanding between us, but I am sure this is what he said.
Perhaps there's a misunderstanding between us, but I am sure this is what he said.
#94
FWIW (Not a hi-jack, just another example)
In my hometown, a guy had a 2012 ZR1 with Z06 sills..
GM eventually sent his dealer the correct parts, and the situation was taken care of. So even on the $100K+ model (previous generation, I know), stuff like this happened.
In my hometown, a guy had a 2012 ZR1 with Z06 sills..
GM eventually sent his dealer the correct parts, and the situation was taken care of. So even on the $100K+ model (previous generation, I know), stuff like this happened.
#95
Melting Slicks
I mentioned the missing door sill phenomenon to my dealer today and got a very logical explanation that fits with the above post. If you order the "STINGRAY" sills, they are LPO, dealer installed options and the car is shipped without door sills in anticipation of the dealer placing the sills during PDI. The fact that the STINGRAY sills aren't yet widely available is a different kettle of fish. My dealer preordered enough far enough ahead of time to have them on hand for their LPO's.
#97
I want to apologize for this huge oversight! If y'all need help getting your door sills please let me know. It sounds like your dealers are taking good care of the situation. Please let me know if there is anything I can do to assist.
Kelly J.
Chevrolet Customer Care
Kelly J.
Chevrolet Customer Care
#99
Safety Car
Someone pointed out earlier that the C7 no longer uses adhesive. The sill plates snap into holes in the body. Apparently when the plant is building a car that calls for the dealer to add the LPO Stingray sills, the plan is to leave off the "corvette" sills. This would explain why QC sees no problem when they see missing sill plates.