Looking to replace stock C7 wheels
I don't know if you like that look, but I like it as well as any of the aftermarket wheels I have seen on this site.
The Best of Corvette for Corvette Enthusiasts
The target wheel offsets for 9.5"/11" wheels and 265/305 tires would be 51mm front and 74mm rear.
Oz Superleggera III at about $900 each:
Front, 19 x 9.5, 59mm, use a 5mm spacer, 265 tire
Rear, 19 x 11, 75mm, 305 tire
Rear, 20 x 11, 75mm, 305 tire
Front, 19 x 8.5, 51mm, 245 tire
Rear, 19 x 10.5, 76mm, 285 tire
Rear, 20 x 10.5, 76mm, 285 tire
BBS RS-GT:
Front, 18 x 9, 54mm, 255 tire, $900 each
Rear, 19 x 10.5, 75mm, 295 tire, $1320 each
Oz Superforgiata at about $1400 each:
Front, 19 x 8.5, 55mm, 245 tire
Rear, 20 x 10, 79mm, 285 tire
And there are custom order Forgelines at about $1400 each
.
Last edited by B Stead; Feb 24, 2014 at 12:01 AM.
The target wheel offsets for 9.5"/11" wheels and 265/305 tires would be 51mm front and 74mm rear.
Oz Superleggera III at about $900 each:
Front, 19 x 9.5, 59mm, use a 5mm spacer, 265 tire
Rear, 19 x 11, 75mm, 305 tire
Rear, 20 x 11, 75mm, 305 tire
Front, 19 x 8.5, 51mm, 245 tire
Rear, 19 x 10.5, 76mm, 285 tire
Rear, 20 x 10.5, 76mm, 285 tire
BBS RS-GT:
Front, 18 x 9, 54mm, 255 tire, $900 each
Rear, 19 x 10.5, 75mm, 295 tire, $1320 each
Oz Superforgiata at about $1400 each:
Front, 19 x 8.5, 55mm, 245 tire
Rear, 20 x 10, 79mm, 285 tire
And there are custom order Forgelines at about $1400 each
.





http://www.pinterest.com/pin/377669118723139359/
the lomas are shopped, not available for the c7 yet, but the best looking c7 photo I have ever seen.
Can't beat TSW for price/quality/availability/fitment...sold stock wheels & broke even.
Last edited by C8Jake; Feb 24, 2014 at 08:42 AM.
We got standard wheels knowing we were going to replace them. When the arrived, I was pleasantly surprised, they look pretty nice. Of course you have no choice but to see them on the car and you might be less harsh given perfect information.
I don't like the Z51 wheels nor that tuning fork look. That style is on Hyundai's and MB's alike. Check out the shopping center parking lot, tuning forks are ubiquitous.
Want something different? Have your set of OEM's stripped and powder coated. You end up with a custom one of wheel just for you. Need a set to powder coat so your car isn't down? PM me.
Last edited by BIg Wash AZ; Feb 24, 2014 at 12:18 PM.
















