TOO much polishing
Race Director
Joined: Sep 2013
Posts: 11,825
Likes: 2,477
From: Ft Lauderdale
Tech Contributor
22hours for me , and a lot of products and tools:
Flex rotary
Griots orbital
4 diff pads- 2of each
3 diff polishes
ISP
CQUARTZ UK finish
RELOAD to finish
And that was just the sides of the car....
Team Owner
Joined: Mar 2012
Posts: 49,384
Likes: 3,924
From: Best Island in the U.S.
St. Jude Donor '12 thru '17
While color sanding and machine polishing isn't rocket science, it's not hard to suddenly burn through the clear on a body line or panel edge, which is a very costly mistake to repair. I used to paint cars for a living so I've done more than my share of color sanding and machine buffing. I've seen enough very costly mistakes by rookies so that I still approach it with caution.
It's also not much fun to do it enough that you realize you've sanded your fingers smooth and you won't have fingerprints for a while.
It's also not much fun to do it enough that you realize you've sanded your fingers smooth and you won't have fingerprints for a while.
Race Director
Joined: Sep 2013
Posts: 11,825
Likes: 2,477
From: Ft Lauderdale
Tech Contributor
