Reverse Logic
Thread Starter
Racer
Joined: Feb 2014
Posts: 294
Likes: 7
From: Milford Delaware
Reverse Logic
Saw these wheel lug guides on the forum and thought that they may be nice. I was dead wrong...These are GREAT, easy to use, holds wheel in place while you go find the lugs nuts 
and are exceptional quality, not to mention Fred at Reverse Logic is great to work with!!
and are exceptional quality, not to mention Fred at Reverse Logic is great to work with!!
Melting Slicks
Joined: Nov 2013
Posts: 2,016
Likes: 73
From: Texas
I certainly do agree, have two and until I tried them out, I really hadn’t paid much attention to how little clearance there is between the wheel and the calipers and how easy it would be to scratch them up when installing a wheel. Had only taken one rear wheel off just to look and learn but mistakes would be easy to make. Fine product at a very reasonable price. Don
Safety Car
Joined: Oct 2014
Posts: 3,543
Likes: 854
Can you provide a link to this vendor for the benefit of myself and other C7 owners who might have an interest.
Thread Starter
Racer
Joined: Feb 2014
Posts: 294
Likes: 7
From: Milford Delaware
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Thread Starter
Racer
Joined: Feb 2014
Posts: 294
Likes: 7
From: Milford Delaware
Make sure to order the F (female) if you order the M you will be sending them back. No need to ask how I know that!!
Safety Car
Joined: Oct 2014
Posts: 3,543
Likes: 854
Order placed on your suggestion.
Former Vendor
Joined: Oct 2010
Posts: 1,250
Likes: 55
From: Philadelphia PA
Thank you CF forum members!
I launched the female threaded lug guide tools a little over two weeks ago and just sold out of the first run yesterday! The second run of the tools is being finished up today so shipments won't be delayed. I really appreciate all of the customer feedback and photos that forum members have posted.
The tools ended up costing about 20% more than I expected so we are looking into ways to reduce the per unit cycle time. Over time there may be slight modifications to the design in order to minimize the cost so that I can maintain the current price point.
GM uses the same M12x1.5 lug size on many of its passenger cars. Increasing the volume by expanding the customer base beyond Corvette owners will help to reduce the per unit set up time cost.
http://www.reverselogic.us/shop.html...ool/p/33249836
The tools ended up costing about 20% more than I expected so we are looking into ways to reduce the per unit cycle time. Over time there may be slight modifications to the design in order to minimize the cost so that I can maintain the current price point.
GM uses the same M12x1.5 lug size on many of its passenger cars. Increasing the volume by expanding the customer base beyond Corvette owners will help to reduce the per unit set up time cost.
http://www.reverselogic.us/shop.html...ool/p/33249836
Race Director
Joined: Sep 2011
Posts: 10,742
Likes: 211
From: Marana, Arizona
I launched the female threaded lug guide tools a little over two weeks ago and just sold out of the first run yesterday! The second run of the tools is being finished up today so shipments won't be delayed. I really appreciate all of the customer feedback and photos that forum members have posted.
The tools ended up costing about 20% more than I expected so we are looking into ways to reduce the per unit cycle time. Over time there may be slight modifications to the design in order to minimize the cost so that I can maintain the current price point.
GM uses the same M12x1.5 lug size on many of its passenger cars. Increasing the volume by expanding the customer base beyond Corvette owners will help to reduce the per unit set up time cost.
http://www.reverselogic.us/shop.html...ool/p/33249836
The tools ended up costing about 20% more than I expected so we are looking into ways to reduce the per unit cycle time. Over time there may be slight modifications to the design in order to minimize the cost so that I can maintain the current price point.
GM uses the same M12x1.5 lug size on many of its passenger cars. Increasing the volume by expanding the customer base beyond Corvette owners will help to reduce the per unit set up time cost.
http://www.reverselogic.us/shop.html...ool/p/33249836
Safety Car
Joined: Oct 2014
Posts: 3,543
Likes: 854
My 3 extenders were delivered yesterday....nice high quality product and will be helpful when taking the wheels off for a comprehensive cleaning.
Great idea and you can thank the Corvette Forum community for spreading the word about this product. Word of mouth advertising is always the best testimonials any business can get.
The photo above also really helped envision the product and it's usefulness.
Thanks Reverse Logic and Fred.
Great idea and you can thank the Corvette Forum community for spreading the word about this product. Word of mouth advertising is always the best testimonials any business can get.
The photo above also really helped envision the product and it's usefulness.
Thanks Reverse Logic and Fred.
Race Director
Joined: Jun 2006
Posts: 10,352
Likes: 9,631
From: Lawton, OK
C7 & C8 Events Correspondent
Tech Contributor
2020 C8 of the Year Finalist - Unmodified
2020 Corvette of the Year (track prepared)
2020 Corvette of the Year Finalist (appearance mods)
C7 of Year Winner (appearance mods) 2019
2017 C7 of Year Finalist
2015 C7 of the Year
St. Jude Donor '14-'15-'16-'17-'18-'19
Thanks for posting!
Le Mans Master
Joined: Dec 2013
Posts: 5,887
Likes: 1,555
From: Calgary Alberta
I certainly do agree, have two and until I tried them out, I really hadn’t paid much attention to how little clearance there is between the wheel and the calipers and how easy it would be to scratch them up when installing a wheel. Had only taken one rear wheel off just to look and learn but mistakes would be easy to make. Fine product at a very reasonable price. Don
edit: What shipping method do you use? Can I request USPS? UPS charges exorbitant duty brokerage fees.
Last edited by Woodson; Feb 24, 2015 at 12:31 PM.
Race Director
Joined: Jun 2006
Posts: 10,352
Likes: 9,631
From: Lawton, OK
C7 & C8 Events Correspondent
Tech Contributor
2020 C8 of the Year Finalist - Unmodified
2020 Corvette of the Year (track prepared)
2020 Corvette of the Year Finalist (appearance mods)
C7 of Year Winner (appearance mods) 2019
2017 C7 of Year Finalist
2015 C7 of the Year
St. Jude Donor '14-'15-'16-'17-'18-'19
Placed an order.
Former Vendor
Joined: Oct 2010
Posts: 1,250
Likes: 55
From: Philadelphia PA
Usps
All orders, domestic and International, for the lug guide tools are shipped via USPS. It's the only method I can use that allows me to offer FREE shipping in the USA and $5 flat rate shipping for Canada.
Le Mans Master
Joined: Apr 2012
Posts: 6,956
Likes: 4,811
From: Camden SC
I just ordered mine. $45.00 for three extensions ($15.00 ea). I could have probably gotten away with ordering just two, but I figure the calipers I am not scratching, the wheels I am not damaging, and the threads I am not potentially stripping are well worth the cost...
Last edited by LIE2ME; Feb 24, 2015 at 12:58 PM.
Le Mans Master
Joined: Dec 2013
Posts: 5,887
Likes: 1,555
From: Calgary Alberta