Just installed visor decals.....
10-06-2016, 07:03 PM
#1
Racer
Thread Starter
Just installed visor decals.....
I've been looking everywhere for some decent decals to cover up the OEM Visor decals....Finally found some at Top Flight Productions that I thought I'd take a chance on. Carbon Fiber look with Red Stingray...I'm quite pleased!!! They match the red stitching and Adrenalin Red interior quite well!! 
BEFORE
AFTER
BEFORE
AFTER
The following 2 users liked this post by mlinn1967:
bjones7131 (10-07-2016),
Strake (10-07-2016)
10-07-2016, 07:49 AM
#4
I looked at the site but could not find the cover in the OP's photo. There were some visor covers listed with a link to see more but the link did not work, at least for me. Any help any of you can provide?
Thanks,
Thanks,
10-07-2016, 08:16 AM
#5
Team Owner
They look good.
10-07-2016, 08:18 AM
#6
Team Owner
10-07-2016, 08:42 AM
#7
Racer
Thread Starter
It looks like the link is broke. I went to this link below then clicked on the 'Visit our Sale Site to See More' and it takes you to more decals, but it is not working at the moment. Shoot them an email at: topflightrepro@yahoo.com
http://www.topflightrepro.com/corvet...products.shtml
10-07-2016, 09:57 AM
#9
These look so much better....
And they are quite low priced to replace the OEM visor covers.
Your choice.....#1 or #2?
..
And they are quite low priced to replace the OEM visor covers.
Your choice.....#1 or #2?
..
The following users liked this post:
tony abbski (10-08-2016)
10-07-2016, 10:18 AM
#11
It looks like the link is broke. I went to this link below then clicked on the 'Visit our Sale Site to See More' and it takes you to more decals, but it is not working at the moment. Shoot them an email at: topflightrepro@yahoo.com
http://www.topflightrepro.com/corvet...products.shtml
http://www.topflightrepro.com/corvet...products.shtml
10-07-2016, 10:19 AM
#12
10-07-2016, 10:21 AM
#13
Miller Time Wisconsin 🍺
Member Since: Oct 2012
Location: The only thing we have to beer is beer itself 🍺
Posts: 9,603
Received 1,440 Likes
on
940 Posts
2022 C7 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2018 C7 of Year Winner
2017 C7 of Year Finalist
St. Jude Donor '13-'14-'15-'16-'17-'18-'19-'20-'21-'22
The following users liked this post:
Maxie2U (10-08-2016)
10-07-2016, 01:41 PM
#16
EMINENT 1 & othee CF members:
Glad to help....As per your request......
For the black fabric cover to go over the white visor label. They are about $7.00 for the 2 black adhesive covers....Google:
sunvisorsolutions
For the Corvette Cross flags...Google:
2x (pair/set) Victory Wing Stingray Crossed Flags Fender Emblem Badge Nameplate for Chevrolet Corvette C7 14 2014 (Universal Fitment)
This DIY project will take less than 10 minutes to complete and there is NO need to remove the white safety label.
Works great and looks awesome.
..
Glad to help....As per your request......
For the black fabric cover to go over the white visor label. They are about $7.00 for the 2 black adhesive covers....Google:
sunvisorsolutions
For the Corvette Cross flags...Google:
2x (pair/set) Victory Wing Stingray Crossed Flags Fender Emblem Badge Nameplate for Chevrolet Corvette C7 14 2014 (Universal Fitment)
This DIY project will take less than 10 minutes to complete and there is NO need to remove the white safety label.
Works great and looks awesome.
..
Last edited by nmvettec7; 10-07-2016 at 01:43 PM.
The following 3 users liked this post by nmvettec7:
10-07-2016, 01:50 PM
#17
Miller Time Wisconsin 🍺
Member Since: Oct 2012
Location: The only thing we have to beer is beer itself 🍺
Posts: 9,603
Received 1,440 Likes
on
940 Posts
2022 C7 of the Year Finalist - Modified
C7 of the Year - Modified Finalist 2021
Finalist 2020 C7 of the Year -- Modified
2018 C7 of Year Winner
2017 C7 of Year Finalist
St. Jude Donor '13-'14-'15-'16-'17-'18-'19-'20-'21-'22
EMINENT 1 & othee CF members:
Glad to help....As per your request......
For the black fabric cover to go over the white visor label. They are about $7.00 for the 2 black adhesive covers....Google:
sunvisorsolutions
For the Corvette Cross flags...Google:
2x (pair/set) Victory Wing Stingray Crossed Flags Fender Emblem Badge Nameplate for Chevrolet Corvette C7 14 2014 (Universal Fitment)
This DIY project will take less than 10 minutes to complete and there is NO need to remove the white safety label.
Works great and looks awesome.
..
Glad to help....As per your request......
For the black fabric cover to go over the white visor label. They are about $7.00 for the 2 black adhesive covers....Google:
sunvisorsolutions
For the Corvette Cross flags...Google:
2x (pair/set) Victory Wing Stingray Crossed Flags Fender Emblem Badge Nameplate for Chevrolet Corvette C7 14 2014 (Universal Fitment)
This DIY project will take less than 10 minutes to complete and there is NO need to remove the white safety label.
Works great and looks awesome.
..
Thank you!
The following users liked this post:
Z06 1of38 (10-07-2016)
10-08-2016, 09:28 AM
#19
Safety Car
I like the idea of these, but why do they make them so big? I have a couple sitting on my desk, and they are way larger than they need to be. Anyone make on that is closer to the actual size of the warning sticker?
10-08-2016, 12:18 PM
#20
Instructor
Thanks!
Last edited by Pwdr Extreme; 10-08-2016 at 12:19 PM.