C7Carbon | Rear Diffuser Add-on extensions | 3D designed, help us finish!
#41
Le Mans Master
#42
Platinum Supporting Vendor
Thread Starter
Thanks again for the feedback guys! we are taking notes. We'll make sure to post news as soon as we have more updates available on this project.
#43
Le Mans Master
We are glad to introduce our latest 3D project for the C7 Corvette. An awesome addition to your OEM diffuser that will provide an aggressive look and with easy install.
The rear diffuser extension project is currently going through the design phase, being shaped digitally, covering every design phase with cutting edge 3D technology; from 3D scanning the Vette to 3D printing the actual prototype. We'd love to hear from you, any suggestions or features you would like to see on these extensions, we are all ears!
http://www.c7carbon.com/c7-corvette-...on-fiber-p-662
Thanks again!
The rear diffuser extension project is currently going through the design phase, being shaped digitally, covering every design phase with cutting edge 3D technology; from 3D scanning the Vette to 3D printing the actual prototype. We'd love to hear from you, any suggestions or features you would like to see on these extensions, we are all ears!
http://www.c7carbon.com/c7-corvette-...on-fiber-p-662
Thanks again!
If not im about to buy the DarwinPro version.
#44
Instructor
i think it looks bad ***. 98% of the haters in this thread are 55+, haven't done **** to their vette, still has chrome wheels, and weren't going to buy anything no matter what you posted. make it affordable and do this same thread on the facebook page for a younger, more acceptable consumer.
#46
Le Mans Master
#47
I would definitely purchase this if it was incorporated into a complete replacement diffuser like the C7 Corvette OEM Carbon Fiber Rear Diffuser With Exhaust Shield that you already sell. That would get rid of the afterthought look of this current design and give a sleek factory appearance. Further, I would not consider drilling holes in my new ZR1. As a direct replacement one-piece unit, I would allways have the option to return the vehicle to the original condition.
The following users liked this post:
Panth3r (11-01-2019)
#48
Instructor
I would definitely purchase this if it was incorporated into a complete replacement diffuser like the C7 Corvette OEM Carbon Fiber Rear Diffuser With Exhaust Shield that you already sell. That would get rid of the afterthought look of this current design and give a sleek factory appearance. Further, I would not consider drilling holes in my new ZR1. As a direct replacement one-piece unit, I would allways have the option to return the vehicle to the original condition.
Doesn't look like it's ever gonna get made anyway. It's been 2.5 years lol
#50
It really NEEDS to flow better. The gap between the exhaust tray/shield and the first fin on the splitter has got to go. It looks like something Honda guys would glue on their car. Corvette guys have a specific taste and like things to flow and look like the car was "made that way" rather than a chunk of new plastic that was obviously an after thought. It has got to smoothly transition from exhaust all the way to rear fender/wheel side. If you can manage that I am buying a pair in carbon flash lol.
#51
Le Mans Master