Breaking NEWS - 2019 Orders start early!
#381
Every new system or piece of new technology requires a new module or some other bits and pieces, and every little nut, bolt, and box counts on the scales.
The following users liked this post:
Maxie2U (10-21-2017)
#382
Le Mans Master
GM does not agree with you.
http://media.chevrolet.com/media/us/...cal-oview.html
Here is a snip from that link.
Corvette established its reputation as leader in technology, design and performance from the moment its sleek, fiberglass-bodied concept was introduced at the General Motors Motorama exposition at New York City’s Waldorf Astoria hotel, on Jan. 17, 1953
http://media.chevrolet.com/media/us/...cal-oview.html
Here is a snip from that link.
Corvette established its reputation as leader in technology, design and performance from the moment its sleek, fiberglass-bodied concept was introduced at the General Motors Motorama exposition at New York City’s Waldorf Astoria hotel, on Jan. 17, 1953
#383
Yes, that's just marketing-speak. Corvette Chief Engineer, Tadge Juechter, as well as his predecessors, have many times said otherwise. You can peruse that at your leisure in the "Ask Tadge" section of this forum, when he addressed this very issue.
It's hard to argue Corvette is a technology leader when they still incorporate engines w/ push rods, and suspensions with leaf springs, but they are tried and true. Corvette has positioned itself as the value leader in high performance, street sports cars.
It's hard to argue Corvette is a technology leader when they still incorporate engines w/ push rods, and suspensions with leaf springs, but they are tried and true. Corvette has positioned itself as the value leader in high performance, street sports cars.
Last edited by Foosh; 10-21-2017 at 12:48 PM.
The following 2 users liked this post by Foosh:
1950silverstreak (10-21-2017),
Maxie2U (10-21-2017)
#384
Race Director
I also agree that the Corvette has never been GM's technology leader, Cadillac has always been the GM brand to offer up the latest in new stuff. Heck, just look at the interiors in the C5 and C6, many of the things in those cars were straight out of the parts bins from Cobalts and Malibus.
I'd rather have a new Corvette priced in the mid $60,000s (CDN dollars) and be rather basic than have all the gadgets and need to start in the mid $70s.
I'd rather have a new Corvette priced in the mid $60,000s (CDN dollars) and be rather basic than have all the gadgets and need to start in the mid $70s.
#385
Corvette Enthusiast
Member Since: Oct 2005
Location: Troy & Dearborn, Michigan
Posts: 5,343
Received 922 Likes
on
614 Posts
Originally Posted by Foosh
Yes, that's just marketing-speak. Corvette Chief Engineer, Tadge Juechter, as well as his predecessors, have many times said otherwise. You can peruse that at your leisure in the "Ask Tadge" section of this forum, when he addressed this very issue.
It's hard to argue Corvette is a technology leader when they still incorporate engines w/ push rods, and suspensions with leaf springs, but they are tried and true. Corvette has positioned itself as the value leader in high performance, street sports cars.
It's hard to argue Corvette is a technology leader when they still incorporate engines w/ push rods, and suspensions with leaf springs, but they are tried and true. Corvette has positioned itself as the value leader in high performance, street sports cars.
To compare different suspension types and call one more technologically advanced as another is incorrect. Each has design strengths and weaknesses. However the comparison between same type suspension can shed light on technology.
The traverse composite leaf spring is for example more technologically advanced versus a pickup truck leaf spring.
#386
I know. I said it was tried and true, and agree it's been adapted and perfected. The Porsche 911 is a another great example of the perfection of an old and somewhat flawed design using technology.
That wasn't the main point, just an example, but no one else is using push rod engines, the leaf spring concept, or builds cars with the engine behind the rear axle, anymore. They are considered out-dated by modern standards, even though a lot of technology is still invested in them by the companies still building them.
That wasn't the main point, just an example, but no one else is using push rod engines, the leaf spring concept, or builds cars with the engine behind the rear axle, anymore. They are considered out-dated by modern standards, even though a lot of technology is still invested in them by the companies still building them.
Last edited by Foosh; 10-21-2017 at 06:20 PM.
#387
Le Mans Master
Member Since: Nov 2015
Location: Lake Havasu City Arizona
Posts: 7,326
Received 3,439 Likes
on
2,059 Posts
The only gadgets I want are performance gadgets. Like supercharger, MSRC, NPP exhaust, etc. Those are my kind of gadgets. That is why I have a 1LT package, and on the next one will be a manual tranny. Thank you.
#388
Le Mans Master
THe rain (and cold) has started here in Portland. This weekend alone we are expected to get three inches of rain. I am so tired of the rain and it's only fall
I would move in a heartbeat to Arizona if it wasn't for my wife's refusal to move. I understand why, our cuties (grand kids) and our kids live close by and we see them all the time.
But I'm not sure I can take another winter so I may have to get a winter place in AZ.
#389
Le Mans Master
I for one don't want ANY of those features in my Corvette. My other cars, yes all of them.
#390
Le Mans Master
#391
Race Director
If we want to continue seeing the Corvette priced as low as it is, then they can't offer the latest gadgets, you can't have it both ways. The Corvette is all about affordable performance, and always has been so I don't see them straying from that philosophy anytime soon. If you want a sports car with all the latest tech, you're gonna have to move up into a higher price bracket, it's as simple as that.
#392
Race Director
Corvette is all about performance but it is probably still the most comfortable sports car around. Who cares about electronic assist gadgets that don't affect performance that only increase weight and price. Heated seats are nice since GM's almost leather is cold during cool days and real hot during warm days.
Besides Corvette has 16 valve push rod motor with leaf springs in the rear. Not exactly a technology leader but I'm glad it is that way.
Besides Corvette has 16 valve push rod motor with leaf springs in the rear. Not exactly a technology leader but I'm glad it is that way.
#393
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,252
Received 5,447 Likes
on
2,272 Posts
OHC tech actually predates OHV tech in auto use. And neither is new tech. Just different tech with different pros/cons.
I welcome features that aid performance in my Corvettes. Would rather not have to buy features that don't (if they're stand-alone options, then great as I appreciate the fact some would like to have them). These cars are becoming heavy turds. I don't want any more crap added to my sports cars.
In my family car - you bet, bring 'em on. Just not in my sports car.
I welcome features that aid performance in my Corvettes. Would rather not have to buy features that don't (if they're stand-alone options, then great as I appreciate the fact some would like to have them). These cars are becoming heavy turds. I don't want any more crap added to my sports cars.
In my family car - you bet, bring 'em on. Just not in my sports car.
#394
Race Director
I ordered my C7 as a 1LT not only to save money but to keep the car simple and lighter. I don't absolutely need heated/vented seats, heads up display, more speakers for my stereo (that I won't listen to often anyways), etc. Just give me the basic Corvette without all the added weight and price tag and I'll still be very happy.
#395
The Consigliere
Member Since: May 2006
Location: 2023 Z06 & 2010 ZR1
Posts: 22,252
Received 5,447 Likes
on
2,272 Posts
Patman - I agree. I think team Corvette has done a pretty good job of balancing these interests, and your comparison of the other cars is a good one. Tastes evolve, and of course the regulators play a significant role as well regarding the weight issue. As you point out, Corvette has managed that balance better than some others.
#396
Corvette Enthusiast
Member Since: Oct 2005
Location: Troy & Dearborn, Michigan
Posts: 5,343
Received 922 Likes
on
614 Posts
I know. I said it was tried and true, and agree it's been adapted and perfected. The Porsche 911 is a another great example of the perfection of an old and somewhat flawed design using technology.
That wasn't the main point, just an example, but no one else is using push rod engines, the leaf spring concept, or builds cars with the engine behind the rear axle, anymore. They are considered out-dated by modern standards, even though a lot of technology is still invested in them by the companies still building them.
That wasn't the main point, just an example, but no one else is using push rod engines, the leaf spring concept, or builds cars with the engine behind the rear axle, anymore. They are considered out-dated by modern standards, even though a lot of technology is still invested in them by the companies still building them.
If technology could be outdated, then manual transmissions are outdated, which I totally disagree with.
#397
Le Mans Master
Owning a sport cars does not require diapers. Maybe you should own a Prius instead of a real sports cars. .
The following users liked this post:
patentcad (10-22-2017)
#398
Team Owner
Member Since: Sep 2005
Location: Big Bend Country, TX
Posts: 29,114
Received 2,186 Likes
on
1,337 Posts
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15- '16-'17-‘18-‘19-'20-'21
NCM Lifetime Member
Without a doubt, the races at COTA are awesome. In fact, they were this weekend. I would have gone except I was still recovering from driving straight back from Spring Mountain on Weds to make sure my son wouldn't miss his weekend with his daughter.
#399
I'm arguing that its impossible for something to be outdated as a type of technology when it comes to powertrain and chassis. Suspension designs of any type can't be outdated. They just don't meet the needs to the customer. We got rid of solid front axles on cars not because it is outdated, but because it didn't meet the ride and handling qualities customers in that segment wanted. In heavy trucks you'd be an idiot to not have this type of axle because for that customer the strength is needed.
If technology could be outdated, then manual transmissions are outdated, which I totally disagree with.
If technology could be outdated, then manual transmissions are outdated, which I totally disagree with.
BTW, I hope I'm not an idiot for having purchased a 42K lbs. GVWR diesel pusher, tag-axle, motorcoach with an independent front suspension.
Last edited by Foosh; 10-22-2017 at 12:10 AM.
#400
Team Owner
that cuts Toyota out of the picture! Enjoy your PRIUS!