Part numbers for Z06 stage one splitter and "scrivets"
#1
Race Director
Thread Starter
Part numbers for Z06 stage one splitter and "scrivets"
Hey all,
On a time crunch and couldn't find Jake's posts. Any one got the part numbers for the Z06 stage one splitter and attachment scrivets. Thanks a lot!
Jimmy
On a time crunch and couldn't find Jake's posts. Any one got the part numbers for the Z06 stage one splitter and attachment scrivets. Thanks a lot!
Jimmy
#2
https://www.corvetteforum.com/forums...d-who-who.html
Sometimes, a little research and time searching helps. But this thread above should help you, and that's what these forums should be all about.
Helping others, seeking nothing in return.
#5
Drifting
Am I missing something or is the Ebay guy really giving these away ?
#6
Just goes to show, how some people are charging ridiculous prices on stuff they sell and taking great advantage of forum members.
A little research goes along way. Nice to know there are other forum members willing to help others and advise of good deals when they find them.
Suggestion is to order from eBay, as there are plenty of sellers under $5.00 for 20 or 25 scrivets with free shipping.
Keep in mind the guys on eBay are still making money.
#8
Drifting
Just ordered from Ebay. I also ordered the splitter from my friend who is the parts manager at a local GM dealer. Now I just have to sit back and wait which is no big deal since my car is covered up and will not see daylight until March.
#9
Race Director
22922352 OEM Z06 splitter $105 shipped
10 groove lock scrivets free
15 minute install priceless
10 groove lock scrivets free
15 minute install priceless
Last edited by C8Jake; 01-09-2015 at 11:52 AM.
#10
Le Mans Master
I still like the security of having metal screws where I could reach the backside of the bumper cover, so I used the same screws and u-nuts that hold the bumper cover on for the outside 6 holes on the leading edge.- Just another option.
PLUS, it allows you to drill a much smaller hole. (1/8" instead of 5/16") Also used 1/4" plastic rivets in the center.
Got 100 of the 1/4" rivets on Ebay for $4.84. The GM part # for 1/4" rivets is 20664092.
The holes will never be seen, but drilling the small hole for screws makes me feel better. (1/8" vs 5/16")
PLUS, it allows you to drill a much smaller hole. (1/8" instead of 5/16") Also used 1/4" plastic rivets in the center.
Got 100 of the 1/4" rivets on Ebay for $4.84. The GM part # for 1/4" rivets is 20664092.
The holes will never be seen, but drilling the small hole for screws makes me feel better. (1/8" vs 5/16")
Last edited by TEXHAWK0; 01-10-2015 at 10:17 AM.
#11
Race Director
Thread Starter
Thanks for the help everyone. I tried to order it this morning and the parts guy says he needed the vin. I explained what was going on so he just ordered it without the vin, said he'd call me if they won't accept it. If push comes to shove, he's going to call their other dealership that has a Z06 and use it's vin!!!!
Jimmy
Jimmy
#12
Race Director
before/after
#13
Team Owner
I got 25 scrivets for $4.49 off of Amazon and free shipping with my Prime account.
#14
Le Mans Master
Thanks for the help everyone. I tried to order it this morning and the parts guy says he needed the vin. I explained what was going on so he just ordered it without the vin, said he'd call me if they won't accept it. If push comes to shove, he's going to call their other dealership that has a Z06 and use it's vin!!!!
Jimmy
Jimmy
#15
Drifting
#16
Race Director
#18
Race Director
#20
Race Director