C7 General Discussion General C7 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

Any way to check/confirm GM mag ride update was done?

Thread Tools
 
Search this Thread
 
Old 05-17-2018, 01:31 AM
  #181  
Dave80C3
Melting Slicks

 
Dave80C3's Avatar
 
Member Since: Jul 2004
Location: Ten Mile TN
Posts: 2,206
Received 277 Likes on 193 Posts

Default

Originally Posted by iclick
Go check on the TIS site for the cal you now have. It'll probably show 84136537 for Real Time Damping, which is the old #. I just had mine done today and it now shows 84421869, which is the correct # for the new cal for our cars. If it shows the latter number you already have the upgrade. In case you aren't familiar with the TIS site, here are the steps:

https://tis2web.service.gm.com/tis2web/

VIN > "Get Cal ID" > K19 > Next > Programming >
Next > Normal > Next > With Semi Active... > Next > Real Time Damping > Next > Desc: Real Time Damping.
I was not familiar with the TIS site.

Thank you very much. I just did that. This is what I got, 84136537 - Real Time Damping. So I have the old like I figured.

This 84168050 and this 84235322 are shown under the old part number. Are those the updates?

I will be calling the dealer to see about getting may car updated. Hopefully they can get me in next week
Old 05-17-2018, 06:26 PM
  #182  
M_G
Advanced
 
M_G's Avatar
 
Member Since: Jan 2017
Location: MI
Posts: 52
Received 12 Likes on 8 Posts
Default

Just had my update done at my local dealer. They had not done one yet and the communication leading up to the even was terrible, but the system shows the updated part number for my 2016 so it looks like they figured it out. I think our tech is good, but the communication from the service adviser wasn't great so I was a little nervous.

I thought the ride was markedly better on the way home from the dealer even though it has not finished the required 8 hour waiting period yet. Excited to see how I feel about it tomorrow.
Old 05-17-2018, 06:35 PM
  #183  
walleyejack
Le Mans Master
 
walleyejack's Avatar
 
Member Since: Oct 2008
Location: Whitby Ont.
Posts: 8,638
Received 899 Likes on 700 Posts

Default

Originally Posted by M_G
Just had my update done at my local dealer. They had not done one yet and the communication leading up to the even was terrible, but the system shows the updated part number for my 2016 so it looks like they figured it out. I think our tech is good, but the communication from the service adviser wasn't great so I was a little nervous.

I thought the ride was markedly better on the way home from the dealer even though it has not finished the required 8 hour waiting period yet. Excited to see how I feel about it tomorrow.
Old 05-20-2018, 04:16 PM
  #184  
Cam2010
Instructor
 
Cam2010's Avatar
 
Member Since: Apr 2016
Location: Marlboro NJ
Posts: 116
Likes: 0
Received 52 Likes on 27 Posts
Default

Ive been trying to run the TIS report. Everytime I get to the final it say "sps.exception.no-valip-cop". Anyone know what that means?
Old 05-20-2018, 10:20 PM
  #185  
Jeff V.
Le Mans Master
 
Jeff V.'s Avatar
 
Member Since: Feb 2006
Location: Kansas City, MO
Posts: 5,978
Received 4,086 Likes on 1,971 Posts

Default

Originally Posted by Cam2010
Ive been trying to run the TIS report. Everytime I get to the final it say "sps.exception.no-valip-cop". Anyone know what that means?
Your car doesn't have MRC.
Old 05-21-2018, 07:27 AM
  #186  
Cam2010
Instructor
 
Cam2010's Avatar
 
Member Since: Apr 2016
Location: Marlboro NJ
Posts: 116
Likes: 0
Received 52 Likes on 27 Posts
Default

Originally Posted by Jeff V.
Your car doesn't have MRC.
My car shows MRC (FE2) from the build sheet to the invoice and the MSRP label. So I'm very confident it does have it.
Old 05-21-2018, 09:27 AM
  #187  
Jeff V.
Le Mans Master
 
Jeff V.'s Avatar
 
Member Since: Feb 2006
Location: Kansas City, MO
Posts: 5,978
Received 4,086 Likes on 1,971 Posts

Default

Originally Posted by Cam2010
My car shows MRC (FE2) from the build sheet to the invoice and the MSRP label. So I'm very confident it does have it.
Then there's a problem with the database entries for your car. A dealer would need to call Techline to get that cleared up.
Old 05-21-2018, 09:57 AM
  #188  
Cam2010
Instructor
 
Cam2010's Avatar
 
Member Since: Apr 2016
Location: Marlboro NJ
Posts: 116
Likes: 0
Received 52 Likes on 27 Posts
Default

Originally Posted by Jeff V.
Then there's a problem with the database entries for your car. A dealer would need to call Techline to get that cleared up.
That makes more sense. Thanks
I am dealer now for upgrade so will see what they say.
Old 05-21-2018, 01:41 PM
  #189  
Cam2010
Instructor
 
Cam2010's Avatar
 
Member Since: Apr 2016
Location: Marlboro NJ
Posts: 116
Likes: 0
Received 52 Likes on 27 Posts
Default

Went to dealer first they ,GM, corrected issues with "no valid -cop" statement. Then they upgraded my FE2 . Went online and now everything appears to be correct including the calibration 84353686 ( base stingray w/ FE2). Drove car home and now it sits fro 8 hrs.

FYI if you live in the monmouth county NJ area Quality Chevrolet in old bridge knew exactly the deal no issues with pricing or anything else. I would recommend them.
Old 05-29-2018, 10:58 PM
  #190  
changw1
Instructor
 
changw1's Avatar
 
Member Since: Apr 2017
Location: Richmond VA
Posts: 132
Received 24 Likes on 23 Posts
Default

Can someone tell me whether MRC was installed correctly on my 2017 GS?

Vin: 1G1YX2D79H5122851
Old 05-30-2018, 08:57 AM
  #191  
Jeff V.
Le Mans Master
 
Jeff V.'s Avatar
 
Member Since: Feb 2006
Location: Kansas City, MO
Posts: 5,978
Received 4,086 Likes on 1,971 Posts

Default

Originally Posted by changw1
Can someone tell me whether MRC was installed correctly on my 2017 GS?

Vin: 1G1YX2D79H5122851
I think it was, but without an official list of calibrations from GM, I can't say for sure.
Old 06-06-2018, 11:41 PM
  #192  
Sellout
Instructor
 
Sellout's Avatar
 
Member Since: Mar 2009
Location: San Diego CA
Posts: 237
Received 78 Likes on 56 Posts

Default

Now I'm wishing I had written down what my calibration part number was when I first looked at this thread...

My car is at the dealership now (18GS FE6) and I asked them to do the mag ride update while it's there. Looking at the TIS site tonight I'm seeing 84421869 for the Real Time Damping calibration, but there's no history underneath it, which seems odd to me.

But that number matches every FE6 2019 Grand Sport VIN I've tried, and I read somewhere that the 2019s are coming with this complete upgrade out of the box now, so hopefully they did it right...

They quoted me a price of 280 so I didn't argue. Hoping to pick the car up tomorrow, assuming they don't need another full day to diagnose an engine tick.
Old 06-07-2018, 11:12 AM
  #193  
iclick
Melting Slicks

 
iclick's Avatar
 
Member Since: Mar 2013
Location: Baton Rouge LA
Posts: 3,104
Received 618 Likes on 420 Posts

Default

Originally Posted by Sellout
My car is at the dealership now (18GS FE6) and I asked them to do the mag ride update while it's there. Looking at the TIS site tonight I'm seeing 84421869 for the Real Time Damping calibration, but there's no history underneath it, which seems odd to me.
My '17 shows no history either after getting the upgrade last month, so I would think you either have a late-build '18 that originally had the upgrade or the dealer has already done it. I would call them and verify, although I assume the TechLine will know if your car already has the upgrade and will advise the dealer accordingly.
The following users liked this post:
Savoy2001 (04-11-2019)
Old 06-07-2018, 12:10 PM
  #194  
JDMilw
Racer
Support Corvetteforum!
 
JDMilw's Avatar
 
Member Since: Dec 2016
Location: Milwaukie Oregon
Posts: 269
Received 82 Likes on 51 Posts
Default

This is exactly what mine shows now. Had the upgrade done last month. 2018 GS build 7/17.


Originally Posted by blueDelusions
In reading a couple of posts up, it seems this part number is the calibration in the 2019 GS FE6?


Old 06-07-2018, 12:54 PM
  #195  
Jeff V.
Le Mans Master
 
Jeff V.'s Avatar
 
Member Since: Feb 2006
Location: Kansas City, MO
Posts: 5,978
Received 4,086 Likes on 1,971 Posts

Default

Originally Posted by GM'er
Unless I saw the screen from post #35 in this thread that showed the "New calibration to support performance parts and motor sport catalog customers", I wouldn't be very confident that it was done.
Don't put it past GM to change the text description without notice. I've seen quite a few 2017-2018 cars that were definitely upgraded, but don't have the text description. This is why I'm so annoyed that they won't publish a final list of calibrations.

Originally Posted by JDMilw
This is exactly what mine shows now. Had the upgrade done last month. 2018 GS build 7/17.
I think you're ok. I went and pulled a bunch of random 2018 GS VINs and for unknown reasons they actually had two choices for the RTD calibration. The upgraded cars no longer have a choice and have the same calibration yours is showing.

It looks like the batch of MRC upgrade calibrations that were released in Q1 of this year (with the exception of the 2017 GS w/FE6) are all 844218xx. So far I've seen 84421867, 84421869 and 84421874.
The following users liked this post:
JDMilw (06-07-2018)
Old 06-07-2018, 12:59 PM
  #196  
JDMilw
Racer
Support Corvetteforum!
 
JDMilw's Avatar
 
Member Since: Dec 2016
Location: Milwaukie Oregon
Posts: 269
Received 82 Likes on 51 Posts
Default

^
Well definitely felt a difference in ride on the way home. I wouldn't call it dramatic, but noticeable. I'm satisfied.
The following users liked this post:
Formula52 (06-12-2018)
Old 06-07-2018, 01:09 PM
  #197  
daixloxbmw
Pro
 
daixloxbmw's Avatar
 
Member Since: Oct 2012
Posts: 665
Received 85 Likes on 56 Posts

Default

Originally Posted by JDMilw
This is exactly what mine shows now. Had the upgrade done last month. 2018 GS build 7/17.
My 2017 GS nonZ07 shows the same thing after I got the upgrade. I feel better knowing others also don't see the text "New calibration to support performance parts and motor sport catalog customers".

Get notified of new replies

To Any way to check/confirm GM mag ride update was done?

Old 06-07-2018, 08:52 PM
  #198  
Sellout
Instructor
 
Sellout's Avatar
 
Member Since: Mar 2009
Location: San Diego CA
Posts: 237
Received 78 Likes on 56 Posts

Default

Update- 84421869 is definitely the upgrade for a non Z07 2018 GS. I picked it up today and it’s very obviously more comfortable. I’ve gone from driving around in touring mode at all times to sport mode on the streets.

Oh, and it only cost me $42 at Bob Stall in La Mesa, CA

Last edited by Sellout; 06-07-2018 at 09:06 PM.
Old 06-08-2018, 12:03 PM
  #199  
mtaxman
Burning Brakes
 
mtaxman's Avatar
 
Member Since: Sep 2015
Location: Williamsburg VA
Posts: 971
Received 335 Likes on 215 Posts
Default

Originally Posted by Sellout
Update- 84421869 is definitely the upgrade for a non Z07 2018 GS. I picked it up today and it’s very obviously more comfortable. I’ve gone from driving around in touring mode at all times to sport mode on the streets.

Oh, and it only cost me $42 at Bob Stall in La Mesa, CA

weren't all 2018 GSs built with the new program? When this first came out that was the info that GM gave us...I had a late build 2017 - last week of the 17 build out - and I know mine came without. But the release said 18s were coming with it.

I hope you didn't pay even $42 for nothing. That's a mysterious price as well.
Old 06-08-2018, 12:18 PM
  #200  
Jeff V.
Le Mans Master
 
Jeff V.'s Avatar
 
Member Since: Feb 2006
Location: Kansas City, MO
Posts: 5,978
Received 4,086 Likes on 1,971 Posts

Default

Originally Posted by mtaxman
weren't all 2018 GSs built with the new program? When this first came out that was the info that GM gave us...I had a late build 2017 - last week of the 17 build out - and I know mine came without. But the release said 18s were coming with it.

I hope you didn't pay even $42 for nothing. That's a mysterious price as well.
No. 18s had 'some' of the new calibration logic. But not the full 2019 spec, which is what the upgrade takes you to.

So 14-17 gets the biggest change, while 18 will see a noticeable but less drastic difference.


Quick Reply: Any way to check/confirm GM mag ride update was done?



All times are GMT -4. The time now is 06:11 AM.