C7 General Discussion General C7 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

Another bent wheel thread-question

Thread Tools
 
Search this Thread
 
Old 09-26-2018, 12:47 PM
  #1  
MMD
Safety Car
Thread Starter
 
MMD's Avatar
 
Member Since: Mar 2018
Posts: 4,754
Received 1,630 Likes on 1,051 Posts
Default Another bent wheel thread-question

I'd like to ask a question and confine my question to only current MY 2019 Grand Sports and Z06 owners. I would like to get a sense as to whether GM has finally addressed the known bent/cracked wheel problem and has reengineered the wheels on these vehicles I cited. Here goes. Has anybody with a either a 2019 Grand Sport or Z06 had any issues with their wheels bending, cracking, or going out of round and what were the particular circumstances you feel that led to this failure? After a cursory search on this forum I could only find 1 poster (2019 owner) indicating they had 2 bent rims but it was not clear whether the cause could be attributed to a road hazard condition and/or over inflated tires. I thank all owners that reply.
Old 09-26-2018, 12:59 PM
  #2  
footba4672
Burning Brakes
 
footba4672's Avatar
 
Member Since: Oct 2002
Location: Clayton, NC
Posts: 981
Received 12 Likes on 12 Posts

Default

Originally Posted by MMD
I'd like to ask a question and confine my question to only current MY 2019 Grand Sports and Z06 owners. I would like to get a sense as to whether GM has finally addressed the known bent/cracked wheel problem and has reengineered the wheels on these vehicles I cited. Here goes. Has anybody with a either a 2019 Grand Sport or Z06 had any issues with their wheels bending, cracking, or going out of round and what were the particular circumstances you feel that led to this failure? After a cursory search on this forum I could only find 1 poster (2019 owner) indicating they had 2 bent rims but it was not clear whether the cause could be attributed to a road hazard condition and/or over inflated tires. I thank all owners that reply.
I had 3 bents wheel and 1 cracked wheel. Wheel and tire insurance covered the repair of the 3 bent and the one cracked wheel. I am in NJ and the roads suck. I do think more is involved than the lousy roads. There are to many with this issue for it to be the roads we are driving on
Old 09-26-2018, 01:10 PM
  #3  
MMD
Safety Car
Thread Starter
 
MMD's Avatar
 
Member Since: Mar 2018
Posts: 4,754
Received 1,630 Likes on 1,051 Posts
Default

Originally Posted by footba4672
I had 3 bents wheel and 1 cracked wheel. Wheel and tire insurance covered the repair of the 3 bent and the one cracked wheel. I am in NJ and the roads suck. I do think more is involved than the lousy roads. There are to many with this issue for it to be the roads we are driving on
Is your vehicle a 2019? Didn't think they had Black Rose 2019 Corvettes. I am trying to find out if GM addressed the wheel problem for model year 2019 "only".
Old 09-26-2018, 02:55 PM
  #4  
footba4672
Burning Brakes
 
footba4672's Avatar
 
Member Since: Oct 2002
Location: Clayton, NC
Posts: 981
Received 12 Likes on 12 Posts

Default

Originally Posted by mmd

is your vehicle a 2019? Didn't think they had black rose 2019 corvettes. I am trying to find out if gm addressed the wheel problem for model year 2019 "only".
2017
The following users liked this post:
MMD (09-26-2018)
Old 09-26-2018, 03:27 PM
  #5  
I Fly Low
Racer
Support Corvetteforum!
 
I Fly Low's Avatar
 
Member Since: Apr 2015
Location: San Diego CA
Posts: 470
Received 128 Likes on 77 Posts
Default

Originally Posted by MMD
I'd like to ask a question and confine my question to only current MY 2019 Grand Sports and Z06 owners. I would like to get a sense as to whether GM has finally addressed the known bent/cracked wheel problem and has reengineered the wheels on these vehicles I cited. Here goes. Has anybody with a either a 2019 Grand Sport or Z06 had any issues with their wheels bending, cracking, or going out of round and what were the particular circumstances you feel that led to this failure? After a cursory search on this forum I could only find 1 poster (2019 owner) indicating they had 2 bent rims but it was not clear whether the cause could be attributed to a road hazard condition and/or over inflated tires. I thank all owners that reply.
2019 GS, 10K miles, no problems so far
The following users liked this post:
MMD (09-26-2018)
Old 09-26-2018, 03:37 PM
  #6  
Classic-Chevy-Guy
Melting Slicks
Support Corvetteforum!
 
Classic-Chevy-Guy's Avatar
 
Member Since: May 2004
Location: West Barnstable MA
Posts: 2,406
Received 270 Likes on 160 Posts

Default

Old 09-26-2018, 03:57 PM
  #7  
MMD
Safety Car
Thread Starter
 
MMD's Avatar
 
Member Since: Mar 2018
Posts: 4,754
Received 1,630 Likes on 1,051 Posts
Default

Originally Posted by Classic-Chevy-Guy
I read this. Scratches on 3 newly ordered wheels. Heresay about other forum posts. No specifics given. So far I am not yet seeing problems with 19 wheels on the wide-bodies. Maybe GM has reengineered thier wheels???
Old 09-26-2018, 04:46 PM
  #8  
Avanti
Race Director
 
Avanti's Avatar
 
Member Since: Mar 2001
Location: Bonneville Salt Flats, 223mph Aug. '04
Posts: 17,381
Received 5,188 Likes on 3,440 Posts

Default

The problem is that there is not yet comparable data for '19s since there are fewer on the road for less time. Do this "survey" in a year and compare to other years. All the best.
Old 09-26-2018, 07:49 PM
  #9  
falcon5619
Burning Brakes
 
falcon5619's Avatar
 
Member Since: Sep 2007
Location: FL
Posts: 1,048
Received 297 Likes on 192 Posts

Default

Keep in mind that the 2019s get the new Mag ride calibrations so they supposedly absorb the bumps better than cars with the prior mag ride calibrations. So, the softer suspension may be helping a bit with the bent/cracked wheel issue.
Old 09-26-2018, 08:05 PM
  #10  
MMD
Safety Car
Thread Starter
 
MMD's Avatar
 
Member Since: Mar 2018
Posts: 4,754
Received 1,630 Likes on 1,051 Posts
Default

Originally Posted by falcon5619
Keep in mind that the 2019s get the new Mag ride calibrations so they supposedly absorb the bumps better than cars with the prior mag ride calibrations. So, the softer suspension may be helping a bit with the bent/cracked wheel issue.
highly questionable. The jury is out on 2019. Eventually the truth will be known.
Old 09-26-2018, 11:42 PM
  #11  
jagamajajaran
Race Director
Support Corvetteforum!
 
jagamajajaran's Avatar
 
Member Since: Jun 2006
Location: Lawton, OK
Posts: 10,297
Received 9,512 Likes on 2,317 Posts
C7 & C8 Events Correspondent
Tech Contributor
2020 C8 of the Year Finalist - Unmodified
2020 Corvette of the Year (track prepared)
2020 Corvette of the Year Finalist (appearance mods)
C7 of Year Winner (appearance mods) 2019
2017 C7 of Year Finalist
2015 C7 of the Year
St. Jude Donor '14-'15-'16-'17-'18-'19

Default

I wonder how many bent or cracked rims have occurred while in track mode during street driving. If you hit a pothole in track mode, you're going to damage a rim.
Old 09-27-2018, 04:10 PM
  #12  
DAAANG
Advanced
 
DAAANG's Avatar
 
Member Since: May 2017
Location: Bay City TX
Posts: 62
Received 15 Likes on 10 Posts
Default

I know the folks at Ron Fellows driving school have stated not to use track mode unless you are on a smooth track or you could damage a wheel.
The following users liked this post:
jagamajajaran (09-27-2018)
Old 09-27-2018, 04:43 PM
  #13  
Classic-Chevy-Guy
Melting Slicks
Support Corvetteforum!
 
Classic-Chevy-Guy's Avatar
 
Member Since: May 2004
Location: West Barnstable MA
Posts: 2,406
Received 270 Likes on 160 Posts

Default

My bent wheel occurred in Touring mode and before the MRC upgrade.
The following 3 users liked this post by Classic-Chevy-Guy:
Chadrad (09-28-2018), jagamajajaran (09-27-2018), MMD (09-27-2018)
Old 09-27-2018, 04:53 PM
  #14  
MMD
Safety Car
Thread Starter
 
MMD's Avatar
 
Member Since: Mar 2018
Posts: 4,754
Received 1,630 Likes on 1,051 Posts
Default

Originally Posted by Classic-Chevy-Guy
My bent wheel occurred in Touring mode and before the MRC upgrade.
confirm 2019?
Old 09-27-2018, 05:28 PM
  #15  
Zjoe6
Moderator
Support Corvetteforum!
 
Zjoe6's Avatar
 
Member Since: Aug 2015
Location: SE WI
Posts: 10,576
Received 3,932 Likes on 2,421 Posts
Default

Originally Posted by MMD

confirm 2019?
The 2019's don't need the MRC upgrade. They already have it.
Old 09-27-2018, 05:42 PM
  #16  
MMD
Safety Car
Thread Starter
 
MMD's Avatar
 
Member Since: Mar 2018
Posts: 4,754
Received 1,630 Likes on 1,051 Posts
Default

Originally Posted by Zjoe6
The 2019's don't need the MRC upgrade. They already have it.
I am aware of that Joe. Just asking the poster to confirm his/her vehicle is a 2019. Sorry for the confusion.
Old 09-27-2018, 09:29 PM
  #17  
CliffB-99
Melting Slicks
 
CliffB-99's Avatar
 
Member Since: Aug 2000
Location: Green Bay WI
Posts: 2,276
Received 135 Likes on 78 Posts

Default

GM never admitted there was a problem, so why would they change anything, particularly in what will likely be the last model year of the C7? It's our fault for hitting a pothole according to Tadge.

Last edited by CliffB-99; 09-27-2018 at 09:30 PM.

Get notified of new replies

To Another bent wheel thread-question

Old 09-27-2018, 09:52 PM
  #18  
Zjoe6
Moderator
Support Corvetteforum!
 
Zjoe6's Avatar
 
Member Since: Aug 2015
Location: SE WI
Posts: 10,576
Received 3,932 Likes on 2,421 Posts
Default

Originally Posted by MMD

I am aware of that Joe. Just asking the poster to confirm his/her vehicle is a 2019. Sorry for the confusion.
No problem. His is a 2017. I saw it in a thread he started about his bent rim.
Old 09-27-2018, 10:20 PM
  #19  
C7 GS RON
4th Gear
 
C7 GS RON's Avatar
 
Member Since: May 2018
Posts: 4
Likes: 0
Received 2 Likes on 1 Post
Default

I have a 2019 GS,last week I hit a small pot hole, bent two rims on the inside of the rim. This is my 8th Corvette I have never bent a rim ,and I lived in upstate New York,I have hit pot holes that you would have though would have bent my frame,but no damage. This time I hit a small bump in the road driving to Florida and two bent wheels. I'm getting estimates now,looks like almost $2000,only have 1600 miles on my car. I cannot tell you how disappointed I 'm with my new car
Old 09-27-2018, 10:46 PM
  #20  
C7 GS RON
4th Gear
 
C7 GS RON's Avatar
 
Member Since: May 2018
Posts: 4
Likes: 0
Received 2 Likes on 1 Post
Default

Originally Posted by MMD
I'd like to ask a question and confine my question to only current MY 2019 Grand Sports and Z06 owners. I would like to get a sense as to whether GM has finally addressed the known bent/cracked wheel problem and has reengineered the wheels on these vehicles I cited. Here goes. Has anybody with a either a 2019 Grand Sport or Z06 had any issues with their wheels bending, cracking, or going out of round and what were the particular circumstances you feel that led to this failure? After a cursory search on this forum I could only find 1 poster (2019 owner) indicating they had 2 bent rims but it was not clear whether the cause could be attributed to a road hazard condition and/or over inflated tires. I thank all owners that reply.
I have a new 2019 GS ,I have two bent wheels,only had 1700 miles on it when I hit a small pot hole. I lived in Rochester New York I know what a pot hole can be.This is my 8th corvette ,the first seven were in new york never had a bent rim. The estimates are close to $1600,Insurance said it would be a incident and would go on to a carfax,and would look like a collision. I;m very disappointed I was driving in the tour mode


Quick Reply: Another bent wheel thread-question



All times are GMT -4. The time now is 01:15 AM.