Just received my stage 2 carbon flash splitter from C 7 Carbon. Great job on the paint and fitment of all the holes for installing. Didn't even have to elongate any of the holes, just had to keep it loose and use an awl to shift it. I put awls, large nails, etc in all of the holes to line them up and riveted one at a time to keep them all aligned.
I had in my arsenal of supplies 3/16 aluminum rivets for securing after I installed all of the factory fasteners finger loose ( tight ? )
Only issue was the I had to elongate the holes (up ) for the stage 2 winglets. There wasn't enough room for the large washer ( had to use my own smaller SS washers and grind the sides down)
I spread the wealth around. ------------------------------ Purchased my Carbon Flash XL rock guards from ACS composite, Great job there!
Just received the stage 2 Carbon Flash splitter from C 7 Carbon, Great job!
Waiting for the Carbon Flash Spats from R.P.I Designs
Rich K ( Vette Ski )