Side skirts
Thread Starter
Instructor
Joined: Sep 2018
Posts: 101
Likes: 14
From: Staten Island NY
Side skirts
I’m looking into buying a set but there are so many options. Plastic, fiberglass, carbon fiber. I tend to stay away from non USA parts. Prices are all over the place. I’m thinking carbon fiber so I don’t have to deal with having someone paint them and dealing with any imperfections. Anyone have carbon fiber skits and love them? Pros and cons? Which brand and how much did you pay? Thanks in advance.
Thread Starter
Instructor
Joined: Sep 2018
Posts: 101
Likes: 14
From: Staten Island NY
Thread Starter
Instructor
Joined: Sep 2018
Posts: 101
Likes: 14
From: Staten Island NY
Drifting
Joined: Oct 2014
Posts: 1,733
Likes: 403
From: Atlanta, GA
I got mine from C7 Carbon. I saw them installed for just a couple days then had to bring my car back to the body shop for something. I'll post plenty of pics when I have her back long enough...LOL....AND when I finally give her a decent bath.
but
I was impressed with C7 Carbon's skirt...similar to the Z06 skirt is what I got...carbon flash color. I believe theirs are fiber glass.
but
I was impressed with C7 Carbon's skirt...similar to the Z06 skirt is what I got...carbon flash color. I believe theirs are fiber glass.
Thread Starter
Instructor
Joined: Sep 2018
Posts: 101
Likes: 14
From: Staten Island NY
I got mine from C7 Carbon. I saw them installed for just a couple days then had to bring my car back to the body shop for something. I'll post plenty of pics when I have her back long enough...LOL....AND when I finally give her a decent bath.
but
I was impressed with C7 Carbon's skirt...similar to the Z06 skirt is what I got...carbon flash color. I believe theirs are fiber glass.
but
I was impressed with C7 Carbon's skirt...similar to the Z06 skirt is what I got...carbon flash color. I believe theirs are fiber glass.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Race Director
Joined: Apr 2000
Posts: 15,344
Likes: 4,009
From: Texas
Keep in mind that "carbon fiber" is a bit misleading. The lower priced parts from RPI, C7Carbon, etc are fiberglass with 1 ply of carbon fiber over the top. There's nothing wrong with that, they look great, RPI and C7Carbon both fit very well, and look like the factory parts. GM parts are truly 100% carbon fiber. Katech and as I recall APR Performance are also 100% carbon fiber. You pay for that accordingly.
Racer
Joined: Oct 2014
Posts: 346
Likes: 70
I have the C7 carbon skirts and stage 2 front splitter, working great 4 years later, I also double tapped them on (albeit with higher end 3M adhesive) and they haven’t budged — check my post history, probably an old thread but should still be back there
Thread Starter
Instructor
Joined: Sep 2018
Posts: 101
Likes: 14
From: Staten Island NY
Keep in mind that "carbon fiber" is a bit misleading. The lower priced parts from RPI, C7Carbon, etc are fiberglass with 1 ply of carbon fiber over the top. There's nothing wrong with that, they look great, RPI and C7Carbon both fit very well, and look like the factory parts. GM parts are truly 100% carbon fiber. Katech and as I recall APR Performance are also 100% carbon fiber. You pay for that accordingly.
Thread Starter
Instructor
Joined: Sep 2018
Posts: 101
Likes: 14
From: Staten Island NY
seen those too. Look good. I found a pair of fiberglass by a company called Kapilini for $150. Don’t know much about them. If I get the fiberglass I would just have them painted flat black.
Last edited by mcioci; Apr 21, 2019 at 05:58 PM.
Burning Brakes
Joined: Oct 2013
Posts: 1,122
Likes: 381
From: Southeastern PA
Check out ACS Composite if you would consider a Canada based company. I’ve purchased several components and fit/finish has been flawless. A bit pricey, but quality and customer service is outstanding
Last edited by runner61627; Apr 21, 2019 at 07:46 PM.
Administrator
Joined: Mar 2001
Posts: 368,743
Likes: 24,886
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Just as a note here, I went with some RPI carbon flash painted side skirts. Nice job on the paint in the areas that will show and fit was good except for the front mounting hole which had to be elongated to match up with the existing factory screw. Was not really a major problem and RPI was notified of the issue - they may have taken corrective action by now.
Once installed the skirts are very solid on the car and look great.
Once installed the skirts are very solid on the car and look great.
Thread Starter
Instructor
Joined: Sep 2018
Posts: 101
Likes: 14
From: Staten Island NY
Thanks everyone for your input. I found a brand new GM set of carbon flash on Facebook marketplace. The guy was asking $500 and I got them for $400. Guy said Firestone broke his front Lip and had to buy him a new one. Guy said GM would only sell it as a kit with the skirts and he didn’t need the skirts so he listed them for sale. He showed me the invoice. $2800 wow. So he gets $400 for his troubles because Firestone didn’t ask for the skirts.
Banned Scam/Spammer
Joined: Nov 2014
Posts: 1,583
Likes: 381
