When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I really would have rather seen a unique design rather than a straight copy and paste of the Lamborghini design.
Even keeping the original C7 design and adding the color changing and sequential lights to them would have been good.
If I could get a set of C7 taillights that have the same general design as stock, but with a more crisp and well defined running light like Audi has, I'd jump on those.
Let me first say that the quality of the lights are very good! They were packaged very secure and protected.
The only problem I had is that there weren’t any instructions included but there were an extra two wires and they weren’t plugged in so I was confused on what to do.
So the only one sheet of paper included in the box had a name Morimoto so I went to YouTube and typed in Morimoto install and found the following video of a Camaro installation.
While watching the video I noticed an installation guide which showed that for sequential you need to have unplugged and for non sequential you need to plug the connectors.
The last recommendation is to put the bezel on first so that you can see if the tabs get hooked properly so that the bezel stays in place. If you screw down lights first, it’s harder to get the tabs to snap in and you can’t visibly see whether they are connected.
In summary, very pleased. I’ll finish install tomorrow and bolt everything back together as I need to make some adjustments on my lower diffuser and button up a few things but wanted to do that before fully securing back together.
Hope this information helps and here are a few initial pictures.
Let me first say that the quality of the lights are very good! They were packaged very secure and protected.
The only problem I had is that there weren’t any instructions included but there were an extra two wires and they weren’t plugged in so I was confused on what to do.
So the only one sheet of paper included in the box had a name Morimoto so I went to YouTube and typed in Morimoto install and found the following video of a Camaro installation.
While watching the video I noticed an installation guide which showed that for sequential you need to have unplugged and for non sequential you need to plug the connectors.
The last recommendation is to put the bezel on first so that you can see if the tabs get hooked properly so that the bezel stays in place. If you screw down lights first, it’s harder to get the tabs to snap in and you can’t visibly see whether they are connected.
In summary, very pleased. I’ll finish install tomorrow and bolt everything back together as I need to make some adjustments on my lower diffuser and button up a few things but wanted to do that before fully securing back together.
Hope this information helps and here are a few initial pictures.
Thank you. Fighting the urge to make this my next mod.
Let me first say that the quality of the lights are very good! They were packaged very secure and protected.
The only problem I had is that there weren’t any instructions included but there were an extra two wires and they weren’t plugged in so I was confused on what to do.
So the only one sheet of paper included in the box had a name Morimoto so I went to YouTube and typed in Morimoto install and found the following video of a Camaro installation.
While watching the video I noticed an installation guide which showed that for sequential you need to have unplugged and for non sequential you need to plug the connectors.
The last recommendation is to put the bezel on first so that you can see if the tabs get hooked properly so that the bezel stays in place. If you screw down lights first, it’s harder to get the tabs to snap in and you can’t visibly see whether they are connected.
In summary, very pleased. I’ll finish install tomorrow and bolt everything back together as I need to make some adjustments on my lower diffuser and button up a few things but wanted to do that before fully securing back together.
Hope this information helps and here are a few initial pictures.
Pics look great! Thank you for sharing!!
We plan on having an install video available in the very near future but wanted to get lights out to everyone ASAP opposed to stashing them here until the guides are prepared.
I was in the "not for me" camp at first but these install pics have changed my mind. If they weren't coming right out calling them Lambo lights i wouldnt have hesitated at all. I mean it would still be obvious where the design came from, but that doesnt mean they dont still look good on a C7
I am betting >95% of typical people that see them on the road are just going to think they look cool and not read into it being a Lambo knockoff. Regardless, i think they look cool so thats all that matters to me. Like others, i think a unique design would have been better received here, but these still look good
