Upper Quarter Panel Vent Replacement
Melting Slicks
Joined: Aug 2018
Posts: 2,004
Likes: 1,583
From: Clermont, Florida
I replaced mine it was very easy. Watched a few you tube videos first. If the panel doesn't pull away from under the port window it has glue on it from the window install. You will have to cut through the glue with a razor knife.. I had one side glued like this. But you might get lucky and both pull out easily.
Last edited by DrivesWithTwoFeet; Jan 17, 2021 at 01:20 PM.
