When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone installed a 14-19 Coupe Waterfall Extension w/access door part # X3701 from Zip Corvette?
I need dimensions of the waterfall.
I have a wind restricter installed so I need to make sure waterfall isn’t going to interfere with wind restricter.
I do not have one but it looks pretty cool. Extra storage for a phone or wallet. Never forget one time when I was going through the drive-through at a bank and I needed to get my wallet out. My long leg pressed against the hatch release button. Before i could drive away, i had to get out of the car and close the hatch.
I would also be interested in see a picture of the center storage compartment open and size of the interior of the compartment. Could make a nice place for a concealed weapon if the size is right.
It will be awesome if you have the space in there to have something like this extending from there with your CW, but most likely the space behind the door is not bigger than the one in the center console
Online catalog does not show open.
you would think they would realize value of showing
I have contacted ZIP and asked for interior dimensions and a photo of the waterfall with the door open.
Surprised me that they were not able to immediately answer my question, whoever read my email had to pass it off to the parts team and sales department.
Hopefully I will have a answer soon.
I have contacted ZIP and asked for interior dimensions and a photo of the waterfall with the door open.
Surprised me that they were not able to immediately answer my question, whoever read my email had to pass it off to the parts team and sales department.
Hopefully I will have a answer soon.
I just received this from RPI. The top width is 8", the bottom width is 5", the depth is 2", and the height is 6.5"
It is marginal at best for any of my CCW.
Wish I could find one in the wild so I could test fit to it.
I just received this from RPI. The top width is 8", the bottom width is 5", the depth is 2", and the height is 6.5"
It is marginal at best for any of my CCW.
Wish I could find one in the wild so I could test fit to it.
C7 Coup Waterfall
