FS: Adrenaline Red GT Seat Backs
#5
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
Looks Great! I am considering the conversion myself! Did you to the conversion yourself or did you have a shop do them for you? Either way, how many hours and how much did the installer charge if you didn't do the conversion yourself.
Last edited by Steve Garrett; 04-17-2017 at 04:33 PM.
#7
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
Its seems thst that some areas don't have a tight pull on the leather and shows like wrinkles as if not enough foam...so after sitting and driving it seems the pressure the body places on them that they will only loosen,wrinkle and crease more? Just trying to learn before I tackle project.
#8
Racer
Thread Starter
The drivers seat most of the wrinkles are out from being in the sun last weekend. The passenger side I repulled the piping and pulled it tighter. The foam was not sitting correctly on the bolster of the seat back. I corrected that in the car, just unbolted seat to shift it towards the door. I will retake pics to show you the difference.
#11
Racer
Thread Starter
I do not have the actual part numbers. I do know they will fit any 2014-2017 Corvette with GT seats, regardless of trim level, or they can be used to convert Comp seat backs to GT seat backs.
Seats are from a 2LZ, heaters are still attached, missing the cooling fans. They were reused on my Comp seat conversion.
Seats are from a 2LZ, heaters are still attached, missing the cooling fans. They were reused on my Comp seat conversion.
#14
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
I completed the Competition Seat conversion last week and have Adrenaline Red seat covers a available after 04screamin sells his. I'm in Michigan!
#15
Racer
Thread Starter
[QUOTE=KGrant;1594526015]Its seems thst that some areas don't have a tight pull on the leather and shows like wrinkles as if not enough foam...so after sitting and driving it seems the pressure the body places on them that they will only loosen,wrinkle and crease more? Just trying to learn before I tackle project.
Pictures
Pictures
The following users liked this post:
KGrant (05-14-2017)
#17
Seatm Backs
I have a complete set of GT seat backs with heaters from my 16 Z06 2LZ, minus the cooling fans, needed them for my new seats.
The leather is like new, no marks on bolsters. I will also include the factory back panels, air bag brackets and air bag covers.
Reason for selling is: I purchased and installed the Competition Seat back conversion for my Z06
New price $350.00 Shipped.
Competition Conversion Pic
The leather is like new, no marks on bolsters. I will also include the factory back panels, air bag brackets and air bag covers.
Reason for selling is: I purchased and installed the Competition Seat back conversion for my Z06
New price $350.00 Shipped.
Competition Conversion Pic
#18
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
Corvette C7 Competition Seat Conversion : Trunk Monkey Parts | Your source for OEM and Aftermarket Accessories
http://www.trunkmonkeyparts.com/corv...it?parent=1163
http://www.trunkmonkeyparts.com/corv...it?parent=1163
The following users liked this post:
kookee1 (05-20-2017)
#19
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
On a scale of 1-10, I would say the level of difficulty the first time for "me" was a 7/10 but if I had to do it again it would be a 5/10. The hardest part is stretching the leather to minimize wrinkles and snapping the headrest bezels in place. It's a little tedious but well worth it and there is a step by step instructions on the vendors website and in the Corvette Forum threads.
Corvette C7 Competition Seat Conversion : Trunk Monkey Parts | Your source for OEM and Aftermarket Accessories
http://www.trunkmonkeyparts.com/corv...it?parent=1163
Corvette C7 Competition Seat Conversion : Trunk Monkey Parts | Your source for OEM and Aftermarket Accessories
http://www.trunkmonkeyparts.com/corv...it?parent=1163
Last edited by KGrant; 05-20-2017 at 02:56 PM.
#20
Instructor
Does it matter the type of leather? I have mulan leather, but I would use Napa on the backs. no one would know unless the color would be different.
Is it possible to add power lumbar?
Is it possible to add power lumbar?