FS: Carbon brake set up c7 Z/GS
#1
Melting Slicks
Thread Starter
Carbon brake set up c7 Z/GS
I have a set up that i used and went to some aftermarket brakes. The calipers are red front and rear. if you are a waxer, you would probably want to get the fronts refinished. All have stainless steel lines. Comes with a set of stock pads front and rear. Rear rotors have plenty of life (2). For front rotors i have a total of (5) 2- are zr1 rotors which were used to bed in some pads. 2 are the original rotors 1/ close to being at the limit for track use, the other is about 50%. And the last is a new c7 rotor. Like i stated you can bolt this right up and go, if you are a waxer, you would probably want to refinish the front calipers. 6500.00 + pp fees. I can send pictures if you are serious, no tire kickers.
C7 front
Zr1 front
C7 rear
C7 front
C7 rear
Last edited by c5racr1; 02-10-2018 at 04:57 PM.
#2
Racer
I have a set up that i used and went to some aftermarket brakes. The calipers are red front and rear. if you are a waxer, you would probably want to get the fronts refinished. All have stainless steel lines. Comes with a set of stock pads front and rear. Rear rotors have plenty of life (2). For front rotors i have a total of (5) 2- are zr1 rotors which were used to bed in some pads. 2 are the original rotors 1/ close to being at the limit for track use, the other is about 50%. And the last is a new c7 rotor. Like i stated you can bolt this right up and go, if you are a waxer, you would probably want to refinish the front calipers. 6500.00 + pp fees. I can send pictures if you are serious, no tire kickers.
#4
#6
Are the calipers different than regular calipers on a Z?