LSXtv-Katech Engine Dyno with Halltech StingerCKN +13HP
Thread Starter
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 672
From: Bristol, Tennessee
St. Jude Donor '09
LSXtv-Katech Engine Dyno with Halltech StingerCKN +13HP
LSXtv online article show +13 HP/8lb-ft just adding the Halltech Stinger Prototype vs. the stock OEM intake.
http://www.lsxtv.com/news/dyno-video...to-lt1-engine/
Katech's custom dyno headers added 10 HP/17lb-ft.
This initial dyno testing was done with our prototype A intake. We have improved upon the initial design since this initial design, and after Katech added their cam, they were at 555 HP.
New injectors and our production StingerCKN put down 565 HP, but it is impossible at this point to determine how much of the +10 came from our production CKN.
Jason has some other tricks up his sleeve coming soon with their complete package.
Katech's custom dyno headers added 10 HP/17lb-ft.
This initial dyno testing was done with our prototype A intake. We have improved upon the initial design since this initial design, and after Katech added their cam, they were at 555 HP.
New injectors and our production StingerCKN put down 565 HP, but it is impossible at this point to determine how much of the +10 came from our production CKN.
Jason has some other tricks up his sleeve coming soon with their complete package.
__________________
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
423-915-6056
For service email:
orders@halltechsystems.com
www.halltechsystems.com
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
423-915-6056
For service email:
orders@halltechsystems.com
www.halltechsystems.com
Last edited by Halltech; Apr 13, 2014 at 10:41 AM.
