Mar 6, 2015, 03:01 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General How-Tos
- C7 Corvette: Torque Value
Important information to help you understand your Corvette.
Browse all: General How-Tos
Torque wrench values for alignment
Thread Starter
Pro
Joined: Nov 2013
Posts: 545
Likes: 245
From: Lower Burrell PA
Torque wrench values for alignment
Hello! Does anyone have the recommended foot pounds torque wrench values for the eight (8) lower control arm cam bolts as well as the two (2) rear toe links? Thank you!
Last edited by copjsd; May 11, 2014 at 11:50 AM.
Melting Slicks
Joined: Jan 2000
Posts: 3,326
Likes: 523
From: home
My experience with factory torque specs for the eccentrics is it is too low if you are tracking the car especially with sticky tires. Tighten them as tight as you can make them (NOT using a 4 foot pipe) and mark them with a sharpie when you are done and see if the marks move after each session.
Thread Starter
Pro
Joined: Nov 2013
Posts: 545
Likes: 245
From: Lower Burrell PA
My experience with factory torque specs for the eccentrics is it is too low if you are tracking the car especially with sticky tires. Tighten them as tight as you can make them (NOT using a 4 foot pipe) and mark them with a sharpie when you are done and see if the marks move after each session.
Thread Starter
Pro
Joined: Nov 2013
Posts: 545
Likes: 245
From: Lower Burrell PA
