Theta- Help!!!
Thread Starter
Melting Slicks
Joined: Sep 2009
Posts: 2,180
Likes: 233
From: Minnetrista Minnesota
Theta- Help!!!
Theta, removing my plenum cover for some custom air brushing. The wiring harness for the fuel injectors are attached to the plenum. Looks like a tie strap and some type of push pin. They are very stubborn to get out. The first one I attempted to remove is nearly mangled and still not coming out. Got any advice/tips? Tks, Doug
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,224
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Get replacements from the dealer. We stock many of those little clips etc so when a job is done it is same a new, so to speak. No one see's it but I always thought it makes or breaks the car when you can tell it's been taken apart.
Race Director
Joined: Jul 2007
Posts: 10,961
Likes: 2,643
From: Texas Hill Country
Theta, removing my plenum cover for some custom air brushing. The wiring harness for the fuel injectors are attached to the plenum. Looks like a tie strap and some type of push pin. They are very stubborn to get out. The first one I attempted to remove is nearly mangled and still not coming out. Got any advice/tips? Tks, Doug
