Halltech Stinger-R rotomolded induction launches
Thread Starter
Supporting Vendor
Joined: Mar 2002
Posts: 13,099
Likes: 671
From: Bristol, Tennessee
St. Jude Donor '09
Halltech Stinger-R rotomolded induction launches
April 15th is our tentative launch date. This is the Halltech Stinger-R rotomolded version of the CKN carbon, Kevlar, Nomex IIIA system.
$595.00 https://www.halltechsystems.com/Prod...roductCode=STR
We have been making the Hybrid system for over a year, but now that the Z06 airbox is a reality in plastic, it is backward compatible with the C7 Stingray Stinger system.
Comes with our high flow filter ST689, the same filter used in our Stinger CKNZ Z06 system, but no tuning is required at all with the C7. This has been our filter for this application since 1-14, with hundreds sold.
We will be test fitting one on a C7 prior to release. Look for these at your local dealer around the end of April.
$595.00 https://www.halltechsystems.com/Prod...roductCode=STR
We have been making the Hybrid system for over a year, but now that the Z06 airbox is a reality in plastic, it is backward compatible with the C7 Stingray Stinger system.
Comes with our high flow filter ST689, the same filter used in our Stinger CKNZ Z06 system, but no tuning is required at all with the C7. This has been our filter for this application since 1-14, with hundreds sold.
We will be test fitting one on a C7 prior to release. Look for these at your local dealer around the end of April.
__________________
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
423-915-6056
For service email:
orders@halltechsystems.com
www.halltechsystems.com
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
423-915-6056
For service email:
orders@halltechsystems.com
www.halltechsystems.com
