C7 Belly Plate with Headers / X Pipe
Thread Starter
Burning Brakes
Joined: Oct 2012
Posts: 873
Likes: 86
From: Katy Texas
C7 Belly Plate with Headers / X Pipe
As some may have issues with clearance after installing headers or X- Pipes, Texas Speed has come out with their new belly plate allowing additional collector room and clearance in the center to accommodate larger pipes and cats if desired. It is a quality piece that I picked up today. I will install later in the week when I return home. No more shimming or bending to get the OEM plate to fit. They offer it in Aluminum and powder coated Black.
Platinum Supporting Vendor
Joined: Sep 2001
Posts: 5,730
Likes: 270
From: VENTURA Ca
I'm thinking of taking the blower off my Z06 and putting it on the truck when I do the YSi on the Z. That sure will be different.
__________________
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
ANDY GREEN- OWNER/ CEO -A&A CORVETTE / A&A SUPERCHARGERS
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
ANDY GREEN- OWNER/ CEO -A&A CORVETTE / A&A SUPERCHARGERS
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
Thread Starter
Burning Brakes
Joined: Oct 2012
Posts: 873
Likes: 86
From: Katy Texas
HP Motorsports just did a new Cadillac with a Procharger...
https://www.facebook.com/HighTechCorvettefans?fref=ts
https://www.facebook.com/HighTechCorvettefans?fref=ts
Thread Starter
Burning Brakes
Joined: Oct 2012
Posts: 873
Likes: 86
From: Katy Texas
installed today, did it in garage so no pics. It fit perfect and gave plenty of clearance. I can now reach the front O2 without pulling the pan if needed. My OE pan did rub in 2 small areas even shimmed down, so this will be a nice change
Team Owner
Joined: Jan 2007
Posts: 29,063
Likes: 1,839
From: cookeville tennessee
How much and is it thicker than the stick piece.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Burning Brakes
Joined: Oct 2012
Posts: 873
Likes: 86
From: Katy Texas
appears to be the same thickness, pricing depends on powdercoating or not, I think they start at 100 to 125 with purchase of their exhaust, not sure of outright purchase. Call Texas Speed to confirm.
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
Glad you like it! We still offer spacers for people looking to save $$, but as you can imagine the plate is priced very aggressively so you guys can run it & keep a near OEM look!!
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
Guys I forgot to mention the plate is stock thickness. Its main goal is to provide clearance for the longer primaries & collectors. Notice how the TSP headers have the longest primaries on that market. This helps torque production but also requires a spacer or different plate. 
Pro
Joined: Jan 2013
Posts: 567
Likes: 28
From: Arizona
Guys I forgot to mention the plate is stock thickness. Its main goal is to provide clearance for the longer primaries & collectors. Notice how the TSP headers have the longest primaries on that market. This helps torque production but also requires a spacer or different plate.