Has anybody installed one of the MSD intakes yet
#1
Burning Brakes
Thread Starter
Has anybody installed one of the MSD intakes yet
I was just curious if anybody has installed one of these intakes yet to see if there were any gains. I want to keep my car NA but am always looking for more power.
#2
Supporting Vendor
Had one "on order" forever lol. Maybe if it ever shows up we can do some testing.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
#3
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
#4
Supporting Vendor
You know we will! Got quite a few C7's we have done na builds on that currently have our ported oem manifold that will let us do some testing to see what gains they get. We will put on an oem manifold to show the 3 graphs, stock, oem ported, msd.
#7
Burning Brakes
Thread Starter
I found one I will be doing before and after dyno's installed on a Cam'd Z51 we'll see what the difference in performance is.
Doing the Pfadt Sway bars as well.
Doing the Pfadt Sway bars as well.
#9
Pro
Hopefully they will be worth the wait. Keeping fingers crossed. Our car goes back into the shop in October for a more aggressive cam and ported heads (TS&P heads / VVT-2 cam package) along with a Circle D 258mm Pro III 3200 converter. I was considering an intake. I saw the procharger one but...
#10
Pro
Hopefully they will be worth the wait. Keeping fingers crossed. Our car goes back into the shop in October for a more aggressive cam and ported heads (TS&P heads / VVT-2 cam package) along with a Circle D 258mm Pro III 3200 converter. I was considering an intake. I saw the procharger one but...
I was over at DBR Performance yesterday and they had a C7 with the engine dropped doing a cam and Procharger upgrade as well. The exhaust port match to the manifolds / headers looks like there could be a lot of clean up done with the stock heads. Wow, a lot of clean up.
#11
Burning Brakes
Thread Starter
the price for the intakes - ouch!
I was over at DBR Performance yesterday and they had a C7 with the engine dropped doing a cam and Procharger upgrade as well. The exhaust port match to the manifolds / headers looks like there could be a lot of clean up done with the stock heads. Wow, a lot of clean up.
I was over at DBR Performance yesterday and they had a C7 with the engine dropped doing a cam and Procharger upgrade as well. The exhaust port match to the manifolds / headers looks like there could be a lot of clean up done with the stock heads. Wow, a lot of clean up.
#13
Burning Brakes
Thread Starter