What is Reasonable Labor cost for Headers, Cam & Valve Train Install
#1
Pro
Thread Starter
Member Since: Jun 2015
Location: New Orleans LA
Posts: 696
Received 191 Likes
on
116 Posts
St. Jude Donor '15-'16
What is Reasonable Labor cost for Headers, Cam & Valve Train Install
I'm considering headers and a cam for my Z51 and wondering what a reasonable labor charge would be for installation of the headers, cam, new valve springs and rods. Thanks for any insights.
JV
JV
Last edited by Jet Vet; 08-21-2016 at 12:45 AM.
#2
Supporting Vendor
around 20-23 hours at whatever the shop's labor rate is. Lot of work on these cars. The headers you will get overlapping labor, it's all going towards getting the cam in and pulling the heads to delete the dod.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914