Any one try this x-pipe?
#1
Instructor
Thread Starter
#2
x-pipe
STAINLESS STEEL CATBACK EXHAUST X-PIPE FOR 14-17 CHEVY CORVETTE C7 LT1/LT4 V8
https://www.amazon.com/dp/B06ZZL77TR..._UUwMzb8KSRF02
Chevy Corvette C7 LT1 / LT4 Stainless Steel Catback Exhaust X-Pipe
https://www.amazon.com/dp/B01N66WM7E..._3qwMzbYWGQTQH
https://www.amazon.com/dp/B06ZZL77TR..._UUwMzb8KSRF02
Chevy Corvette C7 LT1 / LT4 Stainless Steel Catback Exhaust X-Pipe
https://www.amazon.com/dp/B01N66WM7E..._3qwMzbYWGQTQH
sounds great, and priced right. Ed
#3
Instructor
XS Power, it's a Chinese company. They usually clone another company's design. I had a set of their down pipes on my Audi S4. Robotic Tig welds, seemed to be good quality. I don't know what grade of stainless they use though.
They actually looked nicer than the full Magnaflow system I had.
They actually looked nicer than the full Magnaflow system I had.
#4
Instructor
I bought an Ebay X pipe and it worked out just fine. Double check its 304 Stainless, and see what the return policy is. My pipe had one in bent so I straightened it with some persuasion and elbow grease. My pipe had resonators in it, this looks the exact same. Go for it. If you search X pipe you'll find the thread where multiple people have had success with Ebay?Amazon X pipes
#5
Pro
i found the "Manzo" X pipe on ebay. It looks good and is cheaper than the borla/corsa x pipes. Priced right for just an "X pipe", you know?
Thinking if i should pull the plug or stick with Borla like i always have.
Thoughts?
Thinking if i should pull the plug or stick with Borla like i always have.
Thoughts?
#6
Instructor
Thread Starter
I was just curious since if anyone had any experiences with the non-Borla or Corsa version regardless of cost. It appeared to be of equal quality but unsure of grade of steel. $200 or $400 is not big difference in price but since this is more about adding a little sound to an already impressive sounding system it was worth checking to see if anyone else had found or tried one of these.
Thanks for the inputs and post your results if anyone takes the plunge!
Thanks for the inputs and post your results if anyone takes the plunge!
Last edited by Vyper340; 08-21-2017 at 08:37 AM.