Drag Slick Setup
Thread Starter
1st Gear
Joined: Jan 2017
Posts: 1
Likes: 0
Drag Slick Setup
Hello!
I'm having a hell of a time finding a drag setup for my Stingray. I've never purchased a set of wheels or slicks so I'm pretty much in the dark regarding what I need. I was looking into Weld Wheels as well as Mickey Thompson or Hoosier slicks, but I'm having a terrible time finding information regarding fitment. Bolt pattern, offset, wheel width vs tire width, radial vs bias ply, the list goes on and on. There's so much information I'm lacking that I don't even know where to begin or know what will and will not fit my car. If any of you have an existing setup I could take a look at or any information you gave give me, I'd greatly appreciate it.
Thank You!
(Not sure if it matters but current wheel setup is stock 20in rear, 19in front)
I'm having a hell of a time finding a drag setup for my Stingray. I've never purchased a set of wheels or slicks so I'm pretty much in the dark regarding what I need. I was looking into Weld Wheels as well as Mickey Thompson or Hoosier slicks, but I'm having a terrible time finding information regarding fitment. Bolt pattern, offset, wheel width vs tire width, radial vs bias ply, the list goes on and on. There's so much information I'm lacking that I don't even know where to begin or know what will and will not fit my car. If any of you have an existing setup I could take a look at or any information you gave give me, I'd greatly appreciate it.
Thank You!
(Not sure if it matters but current wheel setup is stock 20in rear, 19in front)
Burning Brakes
Joined: Jun 2012
Posts: 1,028
Likes: 88
From: NJ
Hello!
I'm having a hell of a time finding a drag setup for my Stingray. I've never purchased a set of wheels or slicks so I'm pretty much in the dark regarding what I need. I was looking into Weld Wheels as well as Mickey Thompson or Hoosier slicks, but I'm having a terrible time finding information regarding fitment. Bolt pattern, offset, wheel width vs tire width, radial vs bias ply, the list goes on and on. There's so much information I'm lacking that I don't even know where to begin or know what will and will not fit my car. If any of you have an existing setup I could take a look at or any information you gave give me, I'd greatly appreciate it.
Thank You!
(Not sure if it matters but current wheel setup is stock 20in rear, 19in front)
I'm having a hell of a time finding a drag setup for my Stingray. I've never purchased a set of wheels or slicks so I'm pretty much in the dark regarding what I need. I was looking into Weld Wheels as well as Mickey Thompson or Hoosier slicks, but I'm having a terrible time finding information regarding fitment. Bolt pattern, offset, wheel width vs tire width, radial vs bias ply, the list goes on and on. There's so much information I'm lacking that I don't even know where to begin or know what will and will not fit my car. If any of you have an existing setup I could take a look at or any information you gave give me, I'd greatly appreciate it.
Thank You!
(Not sure if it matters but current wheel setup is stock 20in rear, 19in front)
https://www.google.com/url?sa=i&rct=...85364727317559
Last edited by phantom1; Jan 24, 2017 at 12:26 PM.
Team Owner
Joined: Jan 2007
Posts: 29,063
Likes: 1,839
From: cookeville tennessee
ttt
Just call weld wheels, are which ever wheel CO that you see that you like the look of the rim and tell them what car you have they will fix you up 100%. That way you are not buying something that someone may know what they are talking about are may not know 
.
Just look at a Drag set up for the car due to being a less weight rim.
.Just look at a Drag set up for the car due to being a less weight rim.
