Cam Question
Burning Brakes
Joined: Nov 2015
Posts: 1,160
Likes: 40
From: Kuwait
You will need more than just a cam, valley cover, lifters, valves springs, lifter trays, puahrods, phase limter, dod delete, etc im not sure if there is more part in it but that all I remember now
Melting Slicks
Joined: Aug 2014
Posts: 2,746
Likes: 916
You will likely need to swap out the valve springs in the heads, but other than that, you can leave them stock if you wish. Lifters and other components will get replaced. If you go with only a slightly larger cam, you might be able to get by with keeping the stock valve train, but if you're going to go to all the trouble to swap the cam, might as well go with something significantly larger to get the best bang for the buck...here are a few options:
https://www.corvetteforum.com/forums...torsports.html
https://www.corvetteforum.com/forums...torsports.html
