When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hi, I am wondering if anything needs to be done to the Z51 when running on the dyno? I know some cars (Porsche) will get error codes from dyno runs due to diff in rear wheel speed to front.
I am getting the car dynode to determine power/weight for POC run class for track day.
You will likely throw a few codes from a dyno run yes. But just drive the car for 5 mins or when it gets turned on/off a couple of times they will clear.
You will likely throw a few codes from a dyno run yes. But just drive the car for 5 mins or when it gets turned on/off a couple of times they will clear.
the 4th session of the day I finally got the stability control off in track mode and the car was much better to drive. the 4th session happened to be a "fun" race for POC and I was the only street car in that session. I only use this car a few times per year at the track as I race a GT4 clubsport at club races. The Z51 ran great and all I have is the recommended track prep with 18" rims with NT01s. I would benefit from a better brake pad.
The car is really fun to drive and very user friendly.