No-tune camshaft ?
Thread Starter
Platinum Supporting Vendor
Joined: Sep 2001
Posts: 5,730
Likes: 270
From: VENTURA Ca
No-tune camshaft ?
Has anyone found a no-tune camshaft that works? I'm about 90% sure the physical architecture of the C7 camshaft is the same as the C8. I have CNC ported heads, headers, etc. for my C8 and would like to put a baby cam in it while the motor is out. Until I can Tune the C8 properly, I really need a baby cam that keeps the AFM intact.
__________________
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
ANDY GREEN- OWNER/ CEO -A&A CORVETTE / A&A SUPERCHARGERS
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
PLEASE TAKE A MOMENT TO VISIT OUR WEBSITE AT WWW.AACORVETTE.COM
NOW PARTNERING WITH AFFIRM TO OFFER INTEREST FREE FINANCING!
ANDY GREEN- OWNER/ CEO -A&A CORVETTE / A&A SUPERCHARGERS
477 LAMBERT ST
OXNARD CA 93036
WWW.AACorvette.com
A&A CORVETTE SUPERCHARGER SYSTEMS
HOME OF THE WORLDS FIRST
CENTRIFUGALLY SUPERCHARGED C7
SUPERIOR ENGINEERING- SUPERIOR POWER
SUPERIOR PRICING- SUPERIOR CUSTOMER SUPPORT
Andy@AACorvette.com 805- 278 4107
Last edited by Andy@A&ACorvette; May 16, 2022 at 03:02 PM.
Race Director
Joined: Mar 2001
Posts: 19,965
Likes: 6,770
From: Bonneville Salt Flats
I wouldn't hold my breath on this one if I were you. If the cam is different enough from stock to be worth the trouble, I doubt the 'puter will have the "range" to compensate. All I can say, unless someone says otherwise with hands-on experience, is give it a try and see. Then, you'll be the expert reporting. All the best, in any event. 
(btw, just curious... did you mean "C8" or A8?)
(btw, just curious... did you mean "C8" or A8?)
Last edited by Avanti; May 16, 2022 at 01:13 AM.
Thread Starter
Platinum Supporting Vendor
Joined: Sep 2001
Posts: 5,730
Likes: 270
From: VENTURA Ca
I wouldn't hold my breath on this one if I were you. If the cam is different enough from stock to be worth the trouble, I doubt the 'puter will have the "range" to compensate. All I can say, unless someone says otherwise with hands-on experience, is give it a try and see. Then, you'll be the expert reporting. All the best, in any event.
(btw, just curious... did you mean "C8" or A8?)
(btw, just curious... did you mean "C8" or A8?)
