Stainless Works C7 2" Primary Headers @ RDP Store
#61
Supporting Vendor
Thread Starter
Thanks for all the orders we truely appreciate your business
#62
Supporting Vendor
Thread Starter
we wont be beaten on service and pricing and we not only sell performance equipment but install and tune them as well so when you need tech support we are always here for you
#63
Supporting Vendor
Thread Starter
Try the Guys at RDP Store we Offer the Best Pricing with Free Same Day Shipping to the lower 48 states and cost price anywhere else.
#64
Supporting Vendor
Thread Starter
RDP Store is Proud to Offer the New Range of 2" Primary Headers with or without Hi Flow Cats and Including a X Pipe for the C7 Corvette 2014+
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
The best C7 headers on the market just got better! Check out these new features:
•2-inch Primaries - higher-flowing for Z06/Supercharged/Tuned applications
•Relocated Wide-Band O2 Port - access w/o removing chassis brace
•Port Matched Flanges - smooth transition from head to header
What's in the box:
Included in the header system is our high-flow C7 center section, featuring dual 3-inch diameter tubes, and a custom-length X-pipe to even out system pressure from side to side. And as always - this header system has a lifetime warranty.
•Lifetime Warranty
•Rust and corrosion resistant 304 Stainless Steel
•Smooth, high-flowing Mandrel Bends
•Port-Matched
•Strong, silky smooth TIG Welds
•3/8-inch Laser Cut Flanges
For More information PM us for a Price or give us a call on 440 358 5500
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
The best C7 headers on the market just got better! Check out these new features:
•2-inch Primaries - higher-flowing for Z06/Supercharged/Tuned applications
•Relocated Wide-Band O2 Port - access w/o removing chassis brace
•Port Matched Flanges - smooth transition from head to header
What's in the box:
Included in the header system is our high-flow C7 center section, featuring dual 3-inch diameter tubes, and a custom-length X-pipe to even out system pressure from side to side. And as always - this header system has a lifetime warranty.
•Lifetime Warranty
•Rust and corrosion resistant 304 Stainless Steel
•Smooth, high-flowing Mandrel Bends
•Port-Matched
•Strong, silky smooth TIG Welds
•3/8-inch Laser Cut Flanges
For More information PM us for a Price or give us a call on 440 358 5500
#65
Supporting Vendor
Thread Starter
PM us for a Great Deal with Super Forum Member Savings and Free Shipping to the Lower 48 States. Or give us a call on 440 358 5500
#66
Supporting Vendor
Thread Starter
RDP Store is Proud to Offer the New Range of 2" Primary Headers with or without Hi Flow Cats and Including a X Pipe for the C7 Corvette 2014+
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
#67
Supporting Vendor
Thread Starter
RDP Store thanks all the members here for your orders and support and we look forward to working with you all in the future and welcome all new and future customers as well. Thankyou
#68
Supporting Vendor
Thread Starter
Thanks for all the orders we truely appreciate your business
#69
Supporting Vendor
Thread Starter
RDP Store is Proud to Offer the New Range of 2" Primary Headers with or without Hi Flow Cats and Including a X Pipe for the C7 Corvette 2014+
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
The best C7 headers on the market just got better! Check out these new features:
•2-inch Primaries - higher-flowing for Z06/Supercharged/Tuned applications
•Relocated Wide-Band O2 Port - access w/o removing chassis brace
•Port Matched Flanges - smooth transition from head to header
What's in the box:
Included in the header system is our high-flow C7 center section, featuring dual 3-inch diameter tubes, and a custom-length X-pipe to even out system pressure from side to side. And as always - this header system has a lifetime warranty.
•Lifetime Warranty
•Rust and corrosion resistant 304 Stainless Steel
•Smooth, high-flowing Mandrel Bends
•Port-Matched
•Strong, silky smooth TIG Welds
•3/8-inch Laser Cut Flanges
For More information PM us for a Price or give us a call on 440 358 5500
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
The best C7 headers on the market just got better! Check out these new features:
•2-inch Primaries - higher-flowing for Z06/Supercharged/Tuned applications
•Relocated Wide-Band O2 Port - access w/o removing chassis brace
•Port Matched Flanges - smooth transition from head to header
What's in the box:
Included in the header system is our high-flow C7 center section, featuring dual 3-inch diameter tubes, and a custom-length X-pipe to even out system pressure from side to side. And as always - this header system has a lifetime warranty.
•Lifetime Warranty
•Rust and corrosion resistant 304 Stainless Steel
•Smooth, high-flowing Mandrel Bends
•Port-Matched
•Strong, silky smooth TIG Welds
•3/8-inch Laser Cut Flanges
For More information PM us for a Price or give us a call on 440 358 5500
#70
Supporting Vendor
Thread Starter
Use Promo Code of md10d to Save and get Free Shipping to the Lower 48 States
#71
Supporting Vendor
Thread Starter
Bump For Great Savings and Free Shipping
#72
Supporting Vendor
Thread Starter
Thanks for all the orders we truely appreciate your business
#73
Supporting Vendor
Thread Starter
RDP Store is a True Hands on Performance Shop and Not just a Internet Sales Business, we fit, install and Dynotune all of the Products that we sell so that we can not only sell you the parts that you need at a Great Price but we can also give you installation and tuning advice.
PM us here for More Information or give us a call on 440 358 5500 or 440 251 8571
PM us here for More Information or give us a call on 440 358 5500 or 440 251 8571
#74
Supporting Vendor
Thread Starter
RDP Store is Proud to Offer the New Range of 2" Primary Headers with or without Hi Flow Cats and Including a X Pipe for the C7 Corvette 2014+
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
The best C7 headers on the market just got better! Check out these new features:
•2-inch Primaries - higher-flowing for Z06/Supercharged/Tuned applications
•Relocated Wide-Band O2 Port - access w/o removing chassis brace
•Port Matched Flanges - smooth transition from head to header
What's in the box:
Included in the header system is our high-flow C7 center section, featuring dual 3-inch diameter tubes, and a custom-length X-pipe to even out system pressure from side to side. And as always - this header system has a lifetime warranty.
•Lifetime Warranty
•Rust and corrosion resistant 304 Stainless Steel
•Smooth, high-flowing Mandrel Bends
•Port-Matched
•Strong, silky smooth TIG Welds
•3/8-inch Laser Cut Flanges
For More information PM us for a Price or give us a call on 440 358 5500
Unleash the performance on your 2014+ Corvette with this high flowing long tube header system from Stainless Works. This mandrel bent 304 stainless steel system features smooth bends and TIG welded American made fabrication. These 2" primaries were developed for a performance upgraded Corvette with major power adders that need the increased capacity for exhaust flow. This system is tuner friendly with an additional wideband port placed directly under the hole in the tunnel brace. This allows your dyno tuners access without removing this plate to install the sensor.
The best C7 headers on the market just got better! Check out these new features:
•2-inch Primaries - higher-flowing for Z06/Supercharged/Tuned applications
•Relocated Wide-Band O2 Port - access w/o removing chassis brace
•Port Matched Flanges - smooth transition from head to header
What's in the box:
Included in the header system is our high-flow C7 center section, featuring dual 3-inch diameter tubes, and a custom-length X-pipe to even out system pressure from side to side. And as always - this header system has a lifetime warranty.
•Lifetime Warranty
•Rust and corrosion resistant 304 Stainless Steel
•Smooth, high-flowing Mandrel Bends
•Port-Matched
•Strong, silky smooth TIG Welds
•3/8-inch Laser Cut Flanges
For More information PM us for a Price or give us a call on 440 358 5500
#75
Supporting Vendor
Thread Starter
#76
Supporting Vendor
Thread Starter
Pm us for a Promo Code of our Fathers Days Specials
#77
Supporting Vendor
Thread Starter
Thankyou for all the Purchases and your business we greatly appreciate and we value your business and support.
#78
Supporting Vendor
Thread Starter
Free Ceramic Coating on all Stainless Works Headers
#79
Supporting Vendor
Thread Starter
Not only do we Offer Great Savings but we also Offer Discounted Installations and DynoTuning as well, Pm us for a Quote and all Orders over $99 Ship for FREE to the Lower 48 States.
#80
Supporting Vendor
Thread Starter
Pm us for a Deal that will blow all the others AWAY!