C7 Corvette Blind Spot Mirror - NOW AVAILABLE
#23
Premium Supporting Vendor
Thread Starter
Figured some of these would be landing in their new homes today
Here is a simple way to make a guide so that
you can assure that you get the correct placement
of your Blind Spot mirror
Regards
Chip
The following users liked this post:
rsvette12 (08-07-2019)
#25
I'm interested in two sets even though until now not many photos of customers But I'm interested in both the passenger & driver for 2 vettes
#26
Premium Supporting Vendor
Thread Starter
You can find pics and testimony in this thread
https://www.corvetteforum.com/forums...available.html
They just started landing this weekend, so I am sure we will hear more soon
Regards
Chip
#27
Instructor
Thank you for using my picture I created when I first made a post about the European convex mirrors for the C7. I did the picture with the red and blue visibility changes by going to a convex mirror on the drivers side. And yea I have had mine now for 4 years and could not drive the C7 without it. Also I actually re-did the passenger side and made a more convex mirror on that side as it also has some blindspots. Best of luck selling them to all C7 owners.
The following users liked this post:
Custom Corvette Accessories (04-15-2019)
#29
Instructor
I put my convex lens on today. I found instructions in my manual on how to pop off the stock glass which made it super easy to get the accessory glass aligned before I pressed it down tight. (I suggest never taking apart any of the snap-together stuff on your car if it is cold. It was 89*F here today and there was no drama.)
The following 3 users liked this post by MACE_Hardware:
#30
Premium Supporting Vendor
Thread Starter
I put my convex lens on today. I found instructions in my manual on how to pop off the stock glass which made it super easy to get the accessory glass aligned before I pressed it down tight. (I suggest never taking apart any of the snap-together stuff on your car if it is cold. It was 89*F here today and there was no drama.)
Nice
Regards
Chip
The following users liked this post:
Mikey T (08-07-2019)
The following users liked this post:
Scruff Vette (08-08-2019)
The following 2 users liked this post by jwt1603:
Mikey T (08-07-2019),
Scruff Vette (08-08-2019)
#35
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,077
Received 1,196 Likes
on
664 Posts
C7 of the Year - Unmodified Finalist 2021
Chip / CCA: You stated that passenger side comes that way stock OEM but you then respond that you will let people know when passenger side becomes available. Please clarify as I am confused at this point relative to passenger side?
The passenger side is convex from the factory, it comes that way.
You can find pics and testimony in this thread
https://www.corvetteforum.com/forums...available.html
They just started landing this weekend, so I am sure we will hear more soon
Regards
Chip
You can find pics and testimony in this thread
https://www.corvetteforum.com/forums...available.html
They just started landing this weekend, so I am sure we will hear more soon
Regards
Chip
#36
Premium Supporting Vendor
Thread Starter
The mirror is so much better than what is on the car (passenger side)
Even though the passenger side is already convex
That
Customers are wanting one for the passenger side as well.
We are working one it.
but
don't hold your breath, if you knew how long it takes to design and
bring one of these to market. I can tell you that it will not be anytime
in the immediate future
Chip
Last edited by Custom Corvette Accessories; 08-08-2019 at 02:46 PM.
#37
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,077
Received 1,196 Likes
on
664 Posts
C7 of the Year - Unmodified Finalist 2021
Thanks Chip for the clarifying explanation and that makes sense.
The mirror is so much better than what is on the car (passenger side)
Even though the passenger side is already convex
That
Customers are wanting one for the passenger side as well.
We are working one it.
but
don't hold your breath, if you knew how long it takes to design and
bring one of these to market. I can tell you that it will not be anytime
in the immediate future
Chip
Even though the passenger side is already convex
That
Customers are wanting one for the passenger side as well.
We are working one it.
but
don't hold your breath, if you knew how long it takes to design and
bring one of these to market. I can tell you that it will not be anytime
in the immediate future
Chip
The following users liked this post:
Custom Corvette Accessories (08-08-2019)
The following users liked this post:
Custom Corvette Accessories (09-16-2019)
#40
Instructor
I also just finished the caravan. 6500 miles in 19 days. The only concern I had was whether I would miss the auto-dim function of the stock mirror.
I conferred with my co-driver and we really did not have any "through the night" drives. Any time during the caravan, if we were discussing mods, I would whole-hardheartedly recommend the blind-spot driver's mirror. It's really good and it really reduces the stress of driving in traffic.
I conferred with my co-driver and we really did not have any "through the night" drives. Any time during the caravan, if we were discussing mods, I would whole-hardheartedly recommend the blind-spot driver's mirror. It's really good and it really reduces the stress of driving in traffic.
The following users liked this post:
Custom Corvette Accessories (09-16-2019)