Comp seat issue
Thread Starter
Drifting
Joined: Nov 2014
Posts: 1,540
Likes: 49
From: Fort Worth TX
Comp seat issue
Ok so at the dealer for a third time an the rep is sayin the third could be worse as far as wrinkles an that a gm has to come out wens to give the ok.its pretty obvious when the other seat is near perfect an the other looks like iv been storing dumbells on it,still tryn to tell me it has to be worn in??was my other seat worn in??i dont get it how can one be perfect an the two other be messed up,it just blows my mind how hard this is becoming.ontop of that i need a whole new trunk lid that i had posted on another thread that had missing blotches of paint when you looked in the rear mirror.smh maybe im just to dam pickey but sheesh
Drifting
Joined: Jul 2008
Posts: 1,799
Likes: 446
From: FEMA Region 4
The seat cover does not need to be worn in as you said. It might look that way after its well worn in, but not when new. It makes you wonder if the parts that don't pass QC end up as replacement parts.
The hatch isn't acceptable either. I wouldn't want to look at peeling paint or powder coat either even if I couldn't see it in the mirror. I'm not sure how they're made, but too bad if the inside trim is a not a separate piece.
The hatch isn't acceptable either. I wouldn't want to look at peeling paint or powder coat either even if I couldn't see it in the mirror. I'm not sure how they're made, but too bad if the inside trim is a not a separate piece.
Thread Starter
Drifting
Joined: Nov 2014
Posts: 1,540
Likes: 49
From: Fort Worth TX
The seat cover does not need to be worn in as you said. It might look that way after its well worn in, but not when new. It makes you wonder if the parts that don't pass QC end up as replacement parts.
The hatch isn't acceptable either. I wouldn't want to look at peeling paint or powder coat either even if I couldn't see it in the mirror. I'm not sure how they're made, but too bad if the inside trim is a not a separate piece.
The hatch isn't acceptable either. I wouldn't want to look at peeling paint or powder coat either even if I couldn't see it in the mirror. I'm not sure how they're made, but too bad if the inside trim is a not a separate piece.
Thread Starter
Drifting
Joined: Nov 2014
Posts: 1,540
Likes: 49
From: Fort Worth TX
It has now been a week an a half tommorw.i also had a oil change,rotation,alignment an shifter adj,is this to long??its seems the shifter adj would take a dealer an hour maybe 2 hours an the rest can be done within a cuple hours as well aside from the deck lid swapout an seat cover so why do they have to get a manager to look at it its not rocket science GM.
Last edited by Arctic Blastoff; Sep 29, 2015 at 12:50 PM.
Melting Slicks
Joined: May 2010
Posts: 2,674
Likes: 142
From: Aubrey Texas
Dude that is awful, my car had some of the same issues. When I talked to GM executive office they acted like no big issue. We will fix it as long as of is in warranty. Just have issues with your car and see how they respond like your stuck with car, get over it. They don't seem to care now that they have made money off car. Higher price lower quality.
GM just doesn't care period.
GM just doesn't care period.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Drifting
Joined: Nov 2014
Posts: 1,540
Likes: 49
From: Fort Worth TX
Ontop of that i was not even offered a loaner,when i emailed the response team about one no answer was given so I called the dealer an they said none avail so im driving a freakin oldschool civic ugh.il be happier when i get my second car just for these times an when it gets cold.
Le Mans Master
Joined: Oct 2004
Posts: 6,813
Likes: 287
From: Toronto Ontario Canada
If anybody does the factory tour they need to ask why they got rid of the Quality Control inspectors. I am amazed at the level of product quality that gets out of that plant. If more people would refuse delivery at the dealer the plant might get the message. This should not be happening on such an expensive car.
Pro
Joined: Oct 2014
Posts: 742
Likes: 54
From: Yonkers New York
Drive the car - call chevrolet if u must...there is a GM rep on the boards here....here is her contact info...she will respond: try this or look her up in the forum
Send a private message to Chevy Cust Svc
or she is here https://www.corvetteforum.com/forums...rchid=49842185
Chevy Cust Serv
Send a private message to Chevy Cust Svc
or she is here https://www.corvetteforum.com/forums...rchid=49842185
Chevy Cust Serv
Thread Starter
Drifting
Joined: Nov 2014
Posts: 1,540
Likes: 49
From: Fort Worth TX
Drive the car - call chevrolet if u must...there is a GM rep on the boards here....here is her contact info...she will respond: try this or look her up in the forum
Send a private message to Chevy Cust Svc
or she is here https://www.corvetteforum.com/forums...rchid=49842185
Chevy Cust Serv
Send a private message to Chevy Cust Svc
or she is here https://www.corvetteforum.com/forums...rchid=49842185
Chevy Cust Serv
Thread Starter
Drifting
Joined: Nov 2014
Posts: 1,540
Likes: 49
From: Fort Worth TX
Still in the shop...saying they cant replicate the gear popping out an that the seat has to be worn in,wtf.this is the least day im giving them an then im messaging the rep about how much of a moron these guys are.
Thread Starter
Drifting
Joined: Nov 2014
Posts: 1,540
Likes: 49
From: Fort Worth TX
