When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
★NEW!! Z06 Carbon Fiber Exterior Parts - in O.E Factory Matching Weave!
Beautiful GM O.E Matching Carbon Fiber For Your Z06 or GS!
Why have mix matched carbon parts on your expensive ride? We have the OE GM Matching weave! Enhance your Z06's or Grand Sports appearance with
rich-looking, racing-inspired aesthetics. Made from high-quality, lightweight 3K twill carbon fiber material that matches the GM OE carbon fiber, along with vinyl ester-infused resin, for exceptional strength and appearance characteristics.
Z06 Carbon Fiber Hood Vent Insert
Replaces the factory insert. .
Done in O.E factory matching 3k twill carbon fiber. Goes in the same direction as the Hood! Installation takes less than 30 minutes and uses factory fasteners supplied with the kit.
Below demonstrates the vent done in the GM weave with GM tint to match the GM factory exposed carbon hood
_________________________________
NEW! Z06/GS Carbon Fiber Front Grille Brake Duct inserts (Can be used in Regular Stingrays with Z06 grille)
Constructed with the same OEM-spec GM matching carbon fiber material offered on 2015-and-later Corvette Z06 and Grand Sport exterior components!
(Available in regular 2x2 twill also)
These carbon fiber tonneau cover inserts add a premium, high tech accent for the C7 Corvette Stingray convertible. They fit the stingray and the Z06. Available in 2x2 twill carbon fiber or the Matching GM fiber (matches the Z06 Carbon fiber from the factory).
Grand Sport Carbon Fiber Fender Vent Trim Right now FRFEE S&H
All-new, carbon fiber front fender vent trim for the C7 Corvette Grand Sport adds a premium, finishing touch that complements the vehicle’s other carbon fiber elements.
Constructed of the same OEM-spec carbon fiber material offered on C7 Corvettes. This is important if you want to retain a consistent look through out the car. No more mixed matched parts!
Replaces the factory “gills” in the Z06 front fenders, enhancing the car’s appearance and complementing additional carbon fiber accessories. The inserts easily replace the original components using the factory fasteners.
Matching O.E Weave.
This beautiful Halo/targa bar comes in a O.E matching carbon finish. You can leave it, paint the ends or completely paint it the factory color.
(We don't paint)
The carbon matches the factory weave so it flows from front to back..
Based on the design of the production Z06 ducts, these aerodynamically optimized accessories complement other carbon fiber compoenents listed. They also fit 2014+ Stingray models, enabling a 50-percent increase in airflow over the Stingray’s ducts.
When ordering, choose "GM Z06 O.E weave" to match your existing pattern.
The ideal accessory for enhancing cornering capability and high-speed stability on the track, this new spoiler matches the GM carbon fiber specification and features an adjustable, downforce-enhancing wicker (also known as a Gurney flap). Use it with Z06 Carbon Fiber front splitter and new ConceptZ rockers for the maximum aerodynamic benefit.
The rear spoiler and wicker are sold separately:
Based on the design of the production Z06 brake intake and rear cooling ducts, they add visual distinction with the premium appearance of authentic carbon fiber.
Parts take approx. 10-14 business days to ship.
If you have any questions feel free to email us at sales@tkoperformance.com.
OR
Call us 1800 778 9898 from 9-4:30 m-f
Thank you for reading this thread
__________________
Serving The Corvette Forum For 21 Years!!
Allow us to add you to the list of extremely satisfied customers. Order Securely Online 24/7:http://tkoperformance.com/index.html Feel Free To Contact Us By Phone: 1800 -778- 9898 Monday- Friday 9:00am to 4:30pm
Is the Carbon Fiber Hood Vent Insert an exact match with the factory hood insert? Also are any modifications needed to install this. I've read stories from other manufacturers who claim a perfect fit with factory parts but that wasn't the case.
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
Originally Posted by wonka12_98
Is the Carbon Fiber Hood Vent Insert an exact match with the factory hood insert? Also are any modifications needed to install this. I've read stories from other manufacturers who claim a perfect fit with factory parts but that wasn't the case.
Yes, it matches the factory carbon pattern AND it fits correctly too.
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
Thank you for the orders. Please remember, some parts will take approx. 2 weeks to ship. Any questions please feel free to contact us Sales@tkoperformance.com
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
Everything but the Hood extractors are shipping in 2 weeks. Hood extractors are taking a bit longer. Once we catch up with the orders they should also be back to 2 weeks
St. Jude Donor '07-'08-'11-'12-'13-'14-'15-'16-'17
Hey guys, Orders are shipping!
We are modifying the Front Fender Flare Mold to help speed up turn around. All prior orders are done and shipping. But we are holding off on new orders for a couple of weeks.
Everything else is still moving along. Thank you!
06-07-2016, 10:27 PM
★NEW!! Z06 Carbon Fiber Exterior Parts - in O.E Factory Matching Weave!
