View Poll Results: What are your thoughts on the Project 6GR Z-Spec wheels for the C7 Z06?
I love it!!
11
23.40%
I like it.
11
23.40%
Let me think about it....
5
10.64%
Thanks..but I will pass
20
42.55%
Voters: 47. You may not vote on this poll
Project 6GR Z-spec wheels | Spun Forged Technology | C7 Z06 Carbon Ceramic Package
04-05-2017, 09:06 PM
#1
Supporting Vendor
Thread Starter
Project 6GR Z-spec wheels | Spun Forged Technology | C7 Z06 Carbon Ceramic Package
Hello Corvette Members & fellow Enthusiasts,
After custom fitting the world's best for over 16 years, we are proud to introduce the world's first 2016 Corvette C7 Z06/Z07 Package resting
on the all new Project 6GR Z-spec wheels. We have taken all of our experience and knowledge in working with the top manufacturers and the
most discerning owners to provide the most aggressive fitment while providing 100% functionality.
The Project 6GR wheels come in a 19x10 front and 20x12 rear and offer one of the deepest concave designs on the market.
The fitment will provide a direct fitment like factory wheels in which no spacers or adapters are used and also no hub centering rings will be needed, the wheels are hub-centric.
We would also like to note that there is at least 5mm-6mm of clearance between massive Carbon Ceramic Brembo brakes and the inner-barrel of the front wheels.
If you would like to utilize your factory Michelin Pilot Sport Cup 2 tires in the 285/30/19 and 335/25/20 tires, they will fit perfectly on the wheels. =)
Project 6GR Wheels | Latest Spun Forged Technology | Need 4 Speed Motorsports
Wheel Specification
Vehicle: 2016 Chevy Corvette C7 Z06/Z07
Vehilce Notes: Clears the Massive Carbon Creamic Brakes | Front 15.5"-6 piston | Rear 15.3"-4 piston
Wheel Brand: Project 6GR Wheels
Wheel Model: Z-Spec-Chevy Corvette Exclusive C7 Z06 Fitment
Wheel Finish: Satin Black
Wheel Construction: Latest Spun Forged Technology (Rotary Forged)
Wheels Size: Front 19x10.0 | Rear 20x12.0
Project 6GR Wheel Weights: Front 25.7 lbs. | Rear 29.7 lbs.
(OEM Factory Forged Z06 Wheel Weights: Front 26.3 lbs. | Rear 29.8 lbs
Bolt Pattern: 5x120.65
Center Bore: 70.3(Hub Centric)
Tire Brand: Nitto Invo
Tire Size: Front 285/30/19(260AA Treadwear) | Rear 345/25/20 (220AA Treadwear)
As always, We would love to receive your feedback....
__________________
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
Last edited by need4speedmotors; 04-05-2017 at 11:59 PM.
04-06-2017, 12:05 AM
#2
Advanced
Thank you Need 4 Speed for making this possible and taking care of my car! I am extremely happy with the results and in only two days have gotten more compliments on my car than ever. The wheels changed the look completely and everything flows beautifully. This combo is far better than the stock combo with the Cup 2s as far as look and feel. Performance is identical so far.
I highly recommend this shop to anyone looking to get impossible projects done on their Z. I was worried about having wheels that would clear the brakes and not have the "flat" look like the stock wheels. Need 4 Speed accomplished this for me and I couldn't be happier. There is actually a little bit more room between the caliper and the rim than there was with the stock wheels. The ease of cleaning is an added benefit compared to the 45-60 min it would take to clean the stock wheels.
I will keep everyone posted as I put some more miles on the these wheels/tires. Feel free to contact me with any questions or requests.
I highly recommend this shop to anyone looking to get impossible projects done on their Z. I was worried about having wheels that would clear the brakes and not have the "flat" look like the stock wheels. Need 4 Speed accomplished this for me and I couldn't be happier. There is actually a little bit more room between the caliper and the rim than there was with the stock wheels. The ease of cleaning is an added benefit compared to the 45-60 min it would take to clean the stock wheels.
I will keep everyone posted as I put some more miles on the these wheels/tires. Feel free to contact me with any questions or requests.
The following users liked this post:
need4speedmotors (04-07-2017)
04-08-2017, 02:21 PM
#4
Supporting Vendor
Thread Starter
Hello Members,
I would like to share some images of the clearance of the brakes for the front and rear.
Also i would like to share that the 19x12 will also be an option for the rears..
Two Option now 19/20 or 19/19 Deep Concave Profiles.
I would like to share some images of the clearance of the brakes for the front and rear.
Also i would like to share that the 19x12 will also be an option for the rears..
Two Option now 19/20 or 19/19 Deep Concave Profiles.
04-11-2017, 04:14 PM
#5
Supporting Vendor
Thread Starter
I am just a PM, Email or Phone Call Away for any further questions you may have...
Project 6GR Wheels Gloss Black Face Brushed Candy Apple Red Inner Barrel....
Jake L.
Project 6GR Wheels Gloss Black Face Brushed Candy Apple Red Inner Barrel....
Jake L.
Last edited by need4speedmotors; 04-11-2017 at 04:14 PM.
04-14-2017, 02:35 PM
#6
Supporting Vendor
Thread Starter
Endless Finishes Available Upon Request....
Project 6GR Wheels Gloss Brushed Silver
Give me a call for any questions you may have....
323-201-1777
Jake L.
Project 6GR Wheels Gloss Brushed Silver
Give me a call for any questions you may have....
323-201-1777
Jake L.
The following users liked this post:
need4speedmotors (04-18-2017)
04-18-2017, 01:02 PM
#9
Supporting Vendor
Thread Starter
We are just a Pm, Email or Phone Call Away for any questions and pricing..
Project 6GR Wheels Z-Spec
Gloss Black / Brushed Blue Inner Barrel
818-547-5474 Jake L.
Project 6GR Wheels Z-Spec
Gloss Black / Brushed Blue Inner Barrel
818-547-5474 Jake L.
Last edited by need4speedmotors; 04-18-2017 at 01:02 PM.
04-21-2017, 03:23 PM
#10
Supporting Vendor
Thread Starter
Please give me a call for any questions you may have,....
Fresh out the oven, Project 6GR Carbon Fiber Hydro Dip..
Jake L.
818-547-5474 ext. 106
Fresh out the oven, Project 6GR Carbon Fiber Hydro Dip..
Jake L.
818-547-5474 ext. 106
Last edited by need4speedmotors; 04-21-2017 at 03:23 PM.
04-24-2017, 08:28 PM
#11
Supporting Vendor
Thread Starter
Hello Members,
Take a look at this Corvette C7 Z06 on a fresh set of
Project 6GR Wheels Satin Black..
Nitto Invo 285/30/19 & 345/25/20
Loyal Customer from up north California, More images too come
What do you guys think bout this one?
Take a look at this Corvette C7 Z06 on a fresh set of
Project 6GR Wheels Satin Black..
Nitto Invo 285/30/19 & 345/25/20
Loyal Customer from up north California, More images too come
What do you guys think bout this one?
04-25-2017, 01:02 PM
#12
Burning Brakes
Looks sweet!
Interested but concerned about weight. Also, are these wheels JWL/VIA tested?
Any plans on making 18 F/R?
Do you have an option to include a knurled beading on the wheels?
Interested but concerned about weight. Also, are these wheels JWL/VIA tested?
Any plans on making 18 F/R?
Do you have an option to include a knurled beading on the wheels?
The following users liked this post:
need4speedmotors (04-25-2017)
04-25-2017, 03:43 PM
#13
Supporting Vendor
Thread Starter
Checkmate1**
Interested but concerned about weight. Also, are these wheels JWL/VIA tested?
Yes these are JWL/VIA Tested, these wheels have been track tested as well on numerous GT350R, with great results.
Any plans on making 18 F/R? At the moment we will have 19/20 & 19/19..
we might have plans for 18's but first we will have to see if the inner barrel can clear all Z06 Platforms
Do you have an option to include a knurled beading on the wheels?
Yes, we might have that option but let me check with our CNC company to see if they can do that as well for the wheels.
Interested but concerned about weight. Also, are these wheels JWL/VIA tested?
Yes these are JWL/VIA Tested, these wheels have been track tested as well on numerous GT350R, with great results.
Any plans on making 18 F/R? At the moment we will have 19/20 & 19/19..
we might have plans for 18's but first we will have to see if the inner barrel can clear all Z06 Platforms
Do you have an option to include a knurled beading on the wheels?
Yes, we might have that option but let me check with our CNC company to see if they can do that as well for the wheels.
Last edited by need4speedmotors; 04-25-2017 at 07:49 PM.
05-01-2017, 04:56 PM
#14
Supporting Vendor
Thread Starter
We are just a PM, Email or Phone Call away...
Corvette C7 Z06 Project 6GR Z-Spec
19x10 & 20x12
Rotray Forged
Gloss Black are in coming soon!!!!
Give me a call for any information you may need....
818-547-5474
ext. 106
Jake L.
Corvette C7 Z06 Project 6GR Z-Spec
19x10 & 20x12
Rotray Forged
Gloss Black are in coming soon!!!!
Give me a call for any information you may need....
818-547-5474
ext. 106
Jake L.
05-04-2017, 02:56 PM
#15
Supporting Vendor
Thread Starter
Fresh out the oven..
Project 6GR
-Gloss Black Face
-Brushed Blue Lip
-Brushed blue Inner Barrel
Give us a call for any information on your custom set...
818-547-5474
Ext. 106.
Jake L.
Project 6GR
-Gloss Black Face
-Brushed Blue Lip
-Brushed blue Inner Barrel
Give us a call for any information on your custom set...
818-547-5474
Ext. 106.
Jake L.
05-10-2017, 02:51 PM
#16
Supporting Vendor
Thread Starter
Hello Members,
We have 10 sets coming in couple months in the following sizes..
19x10 Deep Concave & 19x12 Deep Concave Gloss Black
19x10 Deep Concave & 20x10 Deep Concave Gloss Black
Feel Free to ask me any questions via PM, Email or on the thread..
We have 10 sets coming in couple months in the following sizes..
19x10 Deep Concave & 19x12 Deep Concave Gloss Black
19x10 Deep Concave & 20x10 Deep Concave Gloss Black
Feel Free to ask me any questions via PM, Email or on the thread..
05-23-2017, 07:34 PM
#19
Supporting Vendor
Thread Starter
We are just a PM, Email or Phone Call..
Project 6GR Brushed Titanium Finish
[/url
Call us for any questions you may have..
19x10 & 19x12 will be coming in about 3-4 weeks..
They will be IN STOCK in Gloss Black Finish..
818-547-5474
Jake L.
Project 6GR Brushed Titanium Finish
[/urlCall us for any questions you may have..
19x10 & 19x12 will be coming in about 3-4 weeks..
They will be IN STOCK in Gloss Black Finish..
818-547-5474
Jake L.
