18% lower pulley and factory manifolds ?
07-03-2017, 08:15 PM
#1
3rd Gear
Thread Starter
Member Since: Jun 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
18% lower pulley and factory manifolds ?
I have a 2017 c7z , curious if anyone is running a 18% pulley with factory manifolds? My plan is to do a borla x pipe , 18% pulley, flex fuel and meth kit . I also have a afe intake . Anyone running a similar setup ? What kinda of times do you run and what power you making ?
07-04-2017, 04:11 AM
#3
ICE enthusiast
I don't recommend going 18% Lower pulley without meth
and even with meth, that car will heat up
and even with meth, that car will heat up
07-04-2017, 11:29 AM
#4
Drifting
There have only been 2 C7Z' to go faster than our Bolt On package and both other cars are procharged swapped heads cam cars.
Our bolt on package consists of an IW 18 lower, gates belt, Halltech intake, Corsa X pipe, NGK plugs, and HPA tuning. All for under $3k installed and tuned.
We have been 9.81@141 on this package.
Feel free to contact us if we can help with anything.
Our bolt on package consists of an IW 18 lower, gates belt, Halltech intake, Corsa X pipe, NGK plugs, and HPA tuning. All for under $3k installed and tuned.
We have been 9.81@141 on this package.
Feel free to contact us if we can help with anything.
Last edited by BooSSted; 07-04-2017 at 11:30 AM.
07-04-2017, 04:42 PM
#5
