Got some new wheels for my Z06
01-29-2018, 01:13 PM
#1
Instructor
Thread Starter
Got some new wheels for my Z06
I went and did a little photo shoot over the weekend of my car with some new wheels. These are the MRR Design FS06. What do you think?
The following 4 users liked this post by Stuman45:
01-29-2018, 01:14 PM
#2
Instructor
Thread Starter
And before anyone says "you need to lower the car" 
I know... But I can barely get it in my garage now
Also here's a link to the gallery on flicker with a few more photos: https://flic.kr/s/aHsmbSDsAx
I know... But I can barely get it in my garage now Also here's a link to the gallery on flicker with a few more photos: https://flic.kr/s/aHsmbSDsAx
Last edited by Stuman45; 01-29-2018 at 01:16 PM.
Really like the WGG and gray calipers combo.
01-29-2018, 02:50 PM
#6
Race Director
Awesome!
01-29-2018, 03:43 PM
#9
Melting Slicks<br><img src="/forums/images/ranks/3k-4k.gif" border="0">
Looks great! But you need to lower the car!!!...someone had to say it.
Some motivation to get out the jackstands and wrenches
Some motivation to get out the jackstands and wrenches
Last edited by Steve Snake Driver; 01-29-2018 at 09:44 PM.
The following users liked this post:
Panth3r (01-30-2018)
The following users liked this post:
Garret (01-29-2018)
01-29-2018, 06:20 PM
#12
Melting Slicks
sweet
01-29-2018, 06:33 PM
#13
Burning Brakes
Wow, way cool Dude! The only thing that would make them better, would be to be coated “bronze”. No seriously, great improvement over stock!
01-29-2018, 06:40 PM
#14
Race Director
01-29-2018, 08:56 PM
#17
awesome!
not to be nosy,
but rough budget ?
Asking because i jacked two of my wheels and staring at $1500+ to replace with stock wheels (which look great but, sheesh)
01-29-2018, 09:55 PM
#19
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,365
Received 7,753 Likes
on
4,182 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Very nice!
01-29-2018, 09:59 PM
#20
Melting Slicks<br><img src="/forums/images/ranks/3k-4k.gif" border="0">
I had some problems getting a 17 GS in my garage after lowering (a 15 Z06, a C6 Z06 and C6 ZR1 all the way down on stock bolts didn't have any problems...go figure) and solved the problem by placing some 3/4 by 10 planks on the garage floor which raised the front up just enough to clear. Waiting on a little warmer weather to lower the 17 Z but might have to go to two board height.