New Toy! Akrapovic Exhaust from MerakiAutoworks for the Z06
#1
Racer
Thread Starter
New Toy! Akrapovic Exhaust from MerakiAutoworks for the Z06
I just got a chance to unpack the Akrapovic exhaust for my Z06 today. I was a little worried about damage during shipping. Josh from MerakiAutoworks told me that Akrapovic does a great job of packing the exhaust and he was right. They packed everything in soft bags, then wrapped them again in bubble wrap. The box was a little beatup from UPS but the exhaust arrived in perfect shape! Thanks for a great deal Josh!
I can't wait to start the install! Anyone want to buy a slightly used Borla X pipe.
I can't wait to start the install! Anyone want to buy a slightly used Borla X pipe.
The following 4 users liked this post by edster75:
The following 2 users liked this post by huggerorangss:
edster75 (03-16-2018),
MerakiAutoworks (03-19-2018)
The following 2 users liked this post by Crushinator:
edster75 (03-16-2018),
MerakiAutoworks (03-19-2018)
#4
Does the Xpipe bolt up to stock exhaust or does it need something because it’s a different diameter? That’s assuming it is. I have been thinking of getting one but not sure if anything else is required. Thanks
#5
Racer
Thread Starter
I'm assuming you mean the borla x pipe. Yes it bolts right up in place of the stock x pipe. Nothing else is required. It's got less than 500 miles on it and in very good condition.
#6
Racer
Thread Starter
PM Josh from MerakiAutoworks for a price. I don't want to advertise it.
Thanks! I really liked the difference the borla x pipe made. Can't wait to hear the Akrapovic!
The following users liked this post:
MerakiAutoworks (03-19-2018)
#8
Advanced
subscribed. Grats on the very very nice system. Look forward to some install pics/vids and of course a vid with the sound!
Will this system require a tune since it's catless? Do you live where they wont get you on inspection for it?
Will this system require a tune since it's catless? Do you live where they wont get you on inspection for it?
#9
Nice choice! Has your car been on a dyno prior to this purchase? I'd be curious if there are truly any performance gains, other than weight loss.
Look forward to pics after install.
Look forward to pics after install.
#10
Team Owner
Love to hear a sound clip once installed.
#11
Adding the catless X pipe will not require a tune and I have no issues with emissions inspection. Akrapovic is a great addition if you can stomach the price. I have it on my C7Z and had on my C6Z as well.
The following 2 users liked this post by Mu$cle:
edster75 (03-17-2018),
MerakiAutoworks (03-19-2018)
#14
Melting Slicks
You're going to love the sound. I have American Racing headers and a F1A ProCharger and it sounds awesome.. I have the same setup on my 2013 Z06 and liked it so much I got it on my 2016 Z06. I plan on getting the same setup on my new ZR1 when I get it next year. Yes it's expensive but well worth it.. The carbon fiber tips look great to...
The following users liked this post:
edster75 (03-17-2018)
#15
Racer
Thread Starter
https://www.corvetteforum.com/forums...yesterday.html
#16
Team Owner
Member Since: Aug 1999
Location: Huntingdon Valley Pa
Posts: 20,228
Received 1,767 Likes
on
969 Posts
Yea put their full system on last year, and I was a little disappointed, I was disappointed that I waited so long to purchase an Akrapovic exhaust system, now putting one on the turbo s I liked it that much, hope they make a system for the ZR1. If your car is a stick rowing thru the gears is like sweet music.
Last edited by hcvone; 03-18-2018 at 07:55 AM.
The following users liked this post:
edster75 (04-02-2018)
#17
Thank you for uploading these photos for all to see. When you actually get to see the exhaust in person you instantly understand why Akra's cost what they do. The material is unrivaled, the welds unrivaled, the quality unrivaled.
We're proud to be Akrapovic's largest dealer in the U.S. thanks in large part to our price match guarantee. This thread alone is going to get a lot of people wanting to replicate your setup!
We're proud to be Akrapovic's largest dealer in the U.S. thanks in large part to our price match guarantee. This thread alone is going to get a lot of people wanting to replicate your setup!
#18
Pro
The X Pipe is only going to touch secondary cats so no tune. If you ditched the primary cats as part of the factory "short manifolds" then yes you'd need a tune. The Akrapovic X-Pipe does the same job as the Borla X-Pipe, what I mean by that is, no tuning required.
It's going to sound awesome OP. Post vids!
It's going to sound awesome OP. Post vids!
Last edited by Can'tHave2MuchHP; 03-19-2018 at 11:10 AM.
The following users liked this post:
MerakiAutoworks (03-19-2018)
#20
Supporting Vendor
I just got a chance to unpack the Akrapovic exhaust for my Z06 today. I was a little worried about damage during shipping. Josh from MerakiAutoworks told me that Akrapovic does a great job of packing the exhaust and he was right. They packed everything in soft bags, then wrapped them again in bubble wrap. The box was a little beatup from UPS but the exhaust arrived in perfect shape! Thanks for a great deal Josh!
I can't wait to start the install! Anyone want to buy a slightly used Borla X pipe.
I can't wait to start the install! Anyone want to buy a slightly used Borla X pipe.
Time to pull some $$ out of savings.. Think of it as an investment hahah.
We have some clips on Youtube of our slip on.. Videos never do justice.
You're going to love the sound. I have American Racing headers and a F1A ProCharger and it sounds awesome.. I have the same setup on my 2013 Z06 and liked it so much I got it on my 2016 Z06. I plan on getting the same setup on my new ZR1 when I get it next year. Yes it's expensive but well worth it.. The carbon fiber tips look great to...
Whens your time?
-Josh
The following users liked this post:
edster75 (04-02-2018)