DSC Controller V4
Thread Starter
Racer
Joined: Oct 2016
Posts: 437
Likes: 61
DSC Controller V4
Hey everyone,
So I see that the 4th version of the great DSC Controller is out now and being sold by Katech and others.
Does anyone have any experience with V4 or additional information on what’s new in this version?
thanks
So I see that the 4th version of the great DSC Controller is out now and being sold by Katech and others.
Does anyone have any experience with V4 or additional information on what’s new in this version?
thanks
Premium Supporting Vendor
Joined: Oct 2005
Posts: 13,975
Likes: 980
From: Clinton Township MI
C7 of Year Finalist (track prepared) 2019
Upgrades to the processor. Mike always yelled at me for trying to log too many channels at once. LOL. They also made some improvements to the terminals. Some people were not being gentle when pushing the main connector in and it was causing some damage to the terminals so they have gone with something that is more robust.
Thread Starter
Racer
Joined: Oct 2016
Posts: 437
Likes: 61
Melting Slicks
Joined: Nov 2000
Posts: 2,225
Likes: 247
From: Merritt Island Florida
Bought the V3 as it was promised to work with 2018 Z06..... well so far not..... ie. it works but no PTM and that's for me same thing as not working
fingers crossed for an update soon :-)
Track Rat
Joined: Oct 2006
Posts: 6,466
Likes: 3,464
Believe me, they're working on it. I tested another firmware update they thought would fix it last weekend. Unfortunately it didn't. I know Mike really wants to get this sorted soon.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Apr 2016
Posts: 3,109
Likes: 697
From: CA
Just an FYI setting ride height via laptop which activated the velocity tuning was a game changer. Huge improvement in all modes. No more bounce in tour, sport felt more controlled, and I’m getting less edge tire wear on the track than last time. The wear is more even not just right on the outer edge like before but more on the whole outer treadblock.
Thread Starter
Racer
Joined: Oct 2016
Posts: 437
Likes: 61
Guys,
i got the V4 today and before the installation on my 2017 Z06 I was wondering if there’s anything special I need to know or to do?
Im going to install it as is without modifying the tune with a computer- is this ok?
In addition, do I need to let the car sits for a while after the installation or when I’m done I’m good to go?
thanks!
i got the V4 today and before the installation on my 2017 Z06 I was wondering if there’s anything special I need to know or to do?
Im going to install it as is without modifying the tune with a computer- is this ok?
In addition, do I need to let the car sits for a while after the installation or when I’m done I’m good to go?
thanks!