Intercooler plumbing solution
Thread Starter
Supporting Vendor
Joined: Feb 2009
Posts: 4,421
Likes: 1,430
From: Mesa Az
Intercooler plumbing solution
We have done lots of LT4,s at my shop and one thing that was also a pain or didn't look as nice as i wanted, was the Y from the 1'' trunk line to the blower inlets when doing any of the offerings out there, or magnuson 2300/2650 with dual inlets. We finally took the time to make our own as I honestly don't know if someone does yet or not. These come in two version.
-16 that Y's to dual -10
or
-16 that Y's to dual -12
we make these in house along with all our fabricated items.
https://cordesperformanceracing.com/...-16-x-dual-10/
https://cordesperformanceracing.com/...-16-x-dual-12/
-16 that Y's to dual -10
or
-16 that Y's to dual -12
we make these in house along with all our fabricated items.
https://cordesperformanceracing.com/...-16-x-dual-10/
https://cordesperformanceracing.com/...-16-x-dual-12/
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Drifting
Joined: Jun 2000
Posts: 1,577
Likes: 99
From: Dubai, UAE
Saw those fittings in CPR latest video for the Z06 with 2650, and looked real nice. I am planning to use those for my planned Mag 2650 swap.
Should I order the dual -10 or dual -12? I am running CPR's front Ice tank & Varimax intercooler pump with 0.75" inlet & outlet
Should I order the dual -10 or dual -12? I am running CPR's front Ice tank & Varimax intercooler pump with 0.75" inlet & outlet
