ERay Wheels Black
#1
Racer
Thread Starter
ERay Wheels Black
I would like all black wheels and certainly don’t want the carbon fiber ones. The other black choice appears to have the machine edge. I really don’t like machine edge. What would it take to make them all black? Paint or wrap or what?
The following users liked this post:
ConcernedCitizen (01-25-2023)
The following users liked this post:
ZimC6 (01-25-2023)
#3
looks like after-market wheels are what you need OP...jmho
Last edited by ATC399; 01-25-2023 at 06:46 PM.
The following 6 users liked this post by VER:
aquake (01-26-2023),
BearZ06 (11-23-2023),
ChevyChad (02-06-2023),
ERay2024 (01-16-2024),
Fishfryer527 (11-23-2023),
and 1 others liked this post.
The following users liked this post:
Young_Z06 (01-25-2023)
The following 6 users liked this post by Hopper12:
ckcarron (11-23-2023),
Fishfryer527 (01-15-2024),
Klakeman (01-26-2023),
Lefty32 (01-27-2023),
msm859 (01-29-2023),
and 1 others liked this post.
The following users liked this post:
K-TownMike (01-25-2023)
#8
Melting Slicks
#10
I don't like the machined edge. The entire wheel machined is nice.
#11
Racer
Thread Starter
#12
Racer
Thread Starter
The Pearl nickel might be nice, visualizer doesn’t portray them very well.
The following users liked this post:
Minkster (01-26-2023)
#13
Race Director
My suggestion is just take the free wheels and for 170 a wheel most
powdercoaters will dismount and remount tires as they powder coat the rims.
another more attractice
soluyion would be to take the free stock rims and just buy aftermarket that have a better offset which is what I have a feeling you will want or you can find a set of black z06 rims that will most
probably for sale as others go to aftermarket rims.
I happen to like the polished lip on the black rims.
imo I believe
sent that route because they photograph better than all black rims
all black rims look great in real life but tend to get lost in photos
I have powered coated all black oem rims on my 2020 z51.
I paid 85 a rim as I gave them unmounted wheels a friend gave me them I put a new set of tires on them.
a little too much work on my part dropping off and picking up so I recommend a different path based off of my effort
powdercoaters will dismount and remount tires as they powder coat the rims.
another more attractice
soluyion would be to take the free stock rims and just buy aftermarket that have a better offset which is what I have a feeling you will want or you can find a set of black z06 rims that will most
probably for sale as others go to aftermarket rims.
I happen to like the polished lip on the black rims.
imo I believe
sent that route because they photograph better than all black rims
all black rims look great in real life but tend to get lost in photos
I have powered coated all black oem rims on my 2020 z51.
I paid 85 a rim as I gave them unmounted wheels a friend gave me them I put a new set of tires on them.
a little too much work on my part dropping off and picking up so I recommend a different path based off of my effort
Last edited by JerriVette; 01-30-2023 at 12:36 AM.
#14
Hydro dipping ..... about $100-125 a wheel
Hydro can also provide. carbon fiber look if you desire.
#15
Instructor
Hi folks, Phil Swift here for Flex-seal. We painted these C8 wheels and then drove them over a ski boat in the rain and they didn't leak....happy Thanxgiving!
The following 3 users liked this post by Aurora Flyer: