Notices
C8 General Discussion The place to discuss the next generation of Corvette.
Sponsored by:
Sponsored by:

chazcron's 3D model work in progress

Thread Tools
 
Search this Thread
 
Old 03-16-2019, 12:25 AM
  #1761  
Dr. ice
Melting Slicks
 
Dr. ice's Avatar
 
Member Since: Dec 2013
Location: Missouri
Posts: 3,231
Received 957 Likes on 608 Posts
Default

Originally Posted by chazcron
OK, folks, here's a triple, All-American red, white, and blue 360º spin render. I know the taillights are a bit messed up, but I felt it was time for another one of these. I also extinguished the grille light bar for this one.

https://youtu.be/GIzgUlVFkJU
The Blue for the win!
Old 03-18-2019, 09:33 AM
  #1762  
chazcron
Racer
Thread Starter
 
chazcron's Avatar
 
Member Since: Oct 2018
Posts: 474
Received 2,829 Likes on 358 Posts
Default

So here's the Blue 360º as a solo:

The following 10 users liked this post by chazcron:
dmaxx3500 (03-22-2019), Dr. ice (03-18-2019), elegant (03-18-2019), got2bblu (03-18-2019), mracer (03-18-2019), oregonsharkman (03-18-2019), r00t61 (03-19-2019), ReddyZ06 (03-18-2019), RJ-92 (03-25-2019), StViperVette (03-18-2019) and 5 others liked this post. (Show less...)
Old 03-18-2019, 09:34 AM
  #1763  
Dr. ice
Melting Slicks
 
Dr. ice's Avatar
 
Member Since: Dec 2013
Location: Missouri
Posts: 3,231
Received 957 Likes on 608 Posts
Default

Originally Posted by chazcron
So here's the Blue 360º as a solo:

https://youtu.be/citrLzcJeTQ
Stunning! Thanks for all your great work. You are a very talented individual!
The following users liked this post:
chazcron (03-18-2019)
Old 03-18-2019, 09:35 AM
  #1764  
elegant
Safety Car
 
elegant's Avatar
 
Member Since: Dec 2003
Location: Pacific Northwest
Posts: 3,639
Received 2,680 Likes on 1,231 Posts

Default

Very good looking rendering and car. Thank you Chaz. You are helping us get through this indeterminable wait...

Last edited by elegant; 03-18-2019 at 09:35 AM.
Old 03-18-2019, 09:36 AM
  #1765  
RapidC84B
Team Owner
 
RapidC84B's Avatar
 
Member Since: Feb 2013
Posts: 20,214
Received 13,165 Likes on 5,989 Posts

Default

Going to be fun to compare the real thing to this thread and see how close you got.
Old 03-18-2019, 06:45 PM
  #1766  
Lotsacubes
Melting Slicks
 
Lotsacubes's Avatar
 
Member Since: Feb 2015
Location: Huntsville AL & Hills of Southern TN
Posts: 2,290
Received 903 Likes on 594 Posts
Default

Originally Posted by elegant
Very good looking rendering and car. Thank you Chaz. You are helping us get through this indeterminable wait...
Yes, I recommend GM give you a C8 for preventing riots by the impatient Vette masses. And same recommendation for Firstvettesoon. He first tried to satiate our cravings. I'm believing it's gonna get better from here. Watching this thread daily. Thank you gentlemen.
The following users liked this post:
firstvettesoon (03-18-2019)
Old 03-18-2019, 08:15 PM
  #1767  
chazcron
Racer
Thread Starter
 
chazcron's Avatar
 
Member Since: Oct 2018
Posts: 474
Received 2,829 Likes on 358 Posts
Default

Originally Posted by Lotsacubes
Yes, I recommend GM give you a C8 for preventing riots by the impatient Vette masses. And same recommendation for Firstvettesoon. He first tried to satiate our cravings. I'm believing it's gonna get better from here. Watching this thread daily. Thank you gentlemen.
I'd settle for an invite to the reveal. FVS, too. His early work inspired me to start my model.
The following 3 users liked this post by chazcron:
elegant (03-18-2019), firstvettesoon (03-18-2019), NewYuriCity (03-28-2019)
Old 03-18-2019, 09:38 PM
  #1768  
firstvettesoon
Melting Slicks
 
firstvettesoon's Avatar
 
Member Since: Sep 2012
Posts: 2,058
Received 1,906 Likes on 750 Posts
Default

^^^

...don’t listen to Chazcron GM.... follow Lotsacubes thought process...

; )

Last edited by firstvettesoon; 03-18-2019 at 09:38 PM.
The following users liked this post:
Zaro Tundov (03-25-2019)
Old 03-18-2019, 09:40 PM
  #1769  
chazcron
Racer
Thread Starter
 
chazcron's Avatar
 
Member Since: Oct 2018
Posts: 474
Received 2,829 Likes on 358 Posts
Default

Originally Posted by firstvettesoon
^^^

...don’t listen to Chazcron GM.... follow Lotsacubes thought process...

; )
Always reaching for the stars, aren't you?

I'd settle for crumbs.
Old 03-18-2019, 10:09 PM
  #1770  
elegant
Safety Car
 
elegant's Avatar
 
Member Since: Dec 2003
Location: Pacific Northwest
Posts: 3,639
Received 2,680 Likes on 1,231 Posts

Default

I sure hope GM invites both firstvettesoon and Chazcron to the reveal. They both so deserve to be at the reveal!

Last edited by elegant; 03-18-2019 at 10:09 PM.
Old 03-19-2019, 12:18 AM
  #1771  
chazcron
Racer
Thread Starter
 
chazcron's Avatar
 
Member Since: Oct 2018
Posts: 474
Received 2,829 Likes on 358 Posts
Default

I actually started modeling the dash. The monitor and button panel are Photoshopped. Not much to go on for the upper dash and when I get to it, the instrument cluster. Proportions are definitely off at this stage.

The following 5 users liked this post by chazcron:
dmaxx3500 (03-22-2019), r00t61 (03-19-2019), ReddyZ06 (03-19-2019), TSanders (03-19-2019), Zaro Tundov (03-25-2019)
Old 03-19-2019, 09:04 AM
  #1772  
CRABBYJ
Safety Car
 
CRABBYJ's Avatar
 
Member Since: Aug 2004
Location: SouthEast PA
Posts: 3,966
Received 1,293 Likes on 722 Posts
Unmodified C8 of the Year 2021 Finalist
2018 C7 of Year Finalist

Default

Chaz, this is an excellent start to visualizing the C8 interior from what we see so far. I took the liberty to enhance your beginning by lightening up for more detail.

The trouble I’m having is reconciling the below pictures from a seen ME pics through the windshield, the leaked interior pic and your interpretation. Let me explain by following my colored letter inscriptions on the leaked interior photo.

A). Your placement of the info screen appears correct rising up and out from the dash.

B). The console area with the buttons is gray and rolls over on the top and does not look to me to interest with “C” which is black. That needs to be resolved, especially the color change.

C). The upper dash leading edge is black and continue toward the passenger side but that detail is hidden by an out of focus area. Thus I tried to interpret with “D”.

D). An extension of “C” continuing in an arc across the passenger side. This I illustrated with the yellow line on the spy shot through the window.

With that I think you need to consider making the dash contour separate and distinct from the consol in both color and where/how they intersect.




Old 03-19-2019, 09:34 AM
  #1773  
firstvettesoon
Melting Slicks
 
firstvettesoon's Avatar
 
Member Since: Sep 2012
Posts: 2,058
Received 1,906 Likes on 750 Posts
Default

Originally Posted by chazcron
Always reaching for the stars, aren't you?

I'd settle for crumbs.
.. ok... I’ll take the car... and give you a ride!...

; )
The following users liked this post:
elegant (03-19-2019)
Old 03-24-2019, 07:04 PM
  #1774  
chazcron
Racer
Thread Starter
 
chazcron's Avatar
 
Member Since: Oct 2018
Posts: 474
Received 2,829 Likes on 358 Posts
Default

Let's get a little frunky, throw everything wide open.




Last edited by chazcron; 03-24-2019 at 07:09 PM.
The following 21 users liked this post by chazcron:
AEmedic (03-24-2019), AVETTE (04-05-2019), bgspot (03-25-2019), Dominic Sorresso (03-24-2019), elegant (03-24-2019), firstvettesoon (03-24-2019), Foosh (03-25-2019), foreverfuelie (03-24-2019), george vee (03-24-2019), mracer (03-24-2019), NewYuriCity (03-28-2019), RapidC84B (03-25-2019), RedDropTop (03-24-2019), ReddyZ06 (03-24-2019), rlhmarines (03-25-2019), rsvette12 (03-25-2019), tractman (03-24-2019), TSanders (03-25-2019), vuuduu21 (03-24-2019), Wass (03-25-2019), Zaro Tundov (03-25-2019) and 16 others liked this post. (Show less...)
Old 03-24-2019, 09:22 PM
  #1775  
IronV
Burning Brakes
 
IronV's Avatar
 
Member Since: Feb 2018
Location: San Francisco Bay Area CALIFORNIA
Posts: 802
Received 495 Likes on 260 Posts
Default Shape vs the Suggestion of Shape

Originally Posted by chazcron


If Chaz's excellent work is correct, the fundamental problem with this car remains. It lacks shape. It lacks curves. It lacks flow.

It's a fat brick with a cacophony of lines etched into it.

They've replaced "shape" with the suggestion of shape. And the really disappointing thing is that it was so unnecessary. The designers either lost their way or the engineers took over. Leadership went south. Nothing illustrates that better than the Ferrari photos. Corvettes are SUPPOSED to be voluptuous.


Last edited by IronV; 03-24-2019 at 09:36 PM.
Old 03-24-2019, 09:33 PM
  #1776  
elegant
Safety Car
 
elegant's Avatar
 
Member Since: Dec 2003
Location: Pacific Northwest
Posts: 3,639
Received 2,680 Likes on 1,231 Posts

Default

Thanks Chaz. Looks like we are at a Corvette car show a year from now. Guessing IronV will not be bringing a C8 to your show.

Looks great to me however.
Old 03-24-2019, 09:35 PM
  #1777  
IronV
Burning Brakes
 
IronV's Avatar
 
Member Since: Feb 2018
Location: San Francisco Bay Area CALIFORNIA
Posts: 802
Received 495 Likes on 260 Posts
Default

No. But I might bring an Aztek with Corvette badging on it... that way you'll know it's me!
The following 2 users liked this post by IronV:
elegant (03-24-2019), Viper (03-25-2019)

Get notified of new replies

To chazcron's 3D model work in progress

Old 03-25-2019, 08:05 AM
  #1778  
CRABBYJ
Safety Car
 
CRABBYJ's Avatar
 
Member Since: Aug 2004
Location: SouthEast PA
Posts: 3,966
Received 1,293 Likes on 722 Posts
Unmodified C8 of the Year 2021 Finalist
2018 C7 of Year Finalist

Default

Originally Posted by chazcron
OK, folks, here's a triple, All-American red, white, and blue 360º spin render. I know the taillights are a bit messed up, but I felt it was time for another one of these. I also extinguished the grille light bar for this one.

https://youtu.be/GIzgUlVFkJU
So, with A and C on this new ME pic posted yesterday what, if anything will you change on the front and scoop of your renders?


Old 03-25-2019, 08:31 AM
  #1779  
Zaro Tundov
Drifting
 
Zaro Tundov's Avatar
 
Member Since: Oct 2018
Location: C&D 10 Best loop
Posts: 1,439
Received 1,039 Likes on 554 Posts
Default

Originally Posted by IronV
If Chaz's excellent work is correct, the fundamental problem with this car remains. It lacks shape. It lacks curves. It lacks flow.

It's a fat brick with a cacophony of lines etched into it.

They've replaced "shape" with the suggestion of shape. And the really disappointing thing is that it was so unnecessary. The designers either lost their way or the engineers took over. Leadership went south. Nothing illustrates that better than the Ferrari photos. Corvettes are SUPPOSED to be voluptuous.

Those who find the test C8s ugly really need to understand that that's exactly what GM wants you to think of the test cars. They arrange foam padding under the vinyl wrap to create the suggestion of a fat brick with a cacophony of lines etched into it.

BTW, I love that phrase, "cacophony of lines." I'm going to steal it if you don't mind.

Last edited by Zaro Tundov; 03-25-2019 at 08:43 AM.
Old 03-25-2019, 08:36 AM
  #1780  
C2C3C4C6
Racer
Support Corvetteforum!
 
C2C3C4C6's Avatar
 
Member Since: Sep 2005
Location: Glen Cove New York
Posts: 267
Received 54 Likes on 25 Posts

Default

This looks better.


Quick Reply: chazcron's 3D model work in progress



All times are GMT -4. The time now is 07:51 AM.