New M755 Flow Forged C8 Corvette specs pre order by MRR Wheels
#21
Supporting Vendor
Thread Starter
sorry buddy thats something we can not currently disclosed, We have worked very hard to obtain proper information at a early time
and we would also hate to disclose any of our connects. but rest assure we will not be building containers full of new C8 corvette wheels and spending thousands of dollars to deliver a incorrect wheel.
and we would also hate to disclose any of our connects. but rest assure we will not be building containers full of new C8 corvette wheels and spending thousands of dollars to deliver a incorrect wheel.
#22
Safety Car
looks gorgeous on those renders. Congrats.
The following users liked this post:
Carlos@mrrwheels (08-26-2019)
#23
Supporting Vendor
Thread Starter
#24
Supporting Vendor
Thread Starter
I understand this model may not be for everyone but we will later in the near future offer other options, for now is the M755 or any of our MRR|NES Forged wheels which have a wide selection.
#25
Supporting Vendor
Thread Starter
Flow forged, or what other brand may call Flow form, Rotary Forged, Hybrid, cold forged , spun forged,
Basically a center piece is created using low pressure casting, the centers are then placed on a forged machine that its purpose is to forged out the barrels to the required width.
this process allows for a much lighter wheel to be made cause the aluminum is compress plus it eliminates cavities or pores with in the aluminum so it maintains a stronger structure.
our M755 is built using this method .
Basically a center piece is created using low pressure casting, the centers are then placed on a forged machine that its purpose is to forged out the barrels to the required width.
this process allows for a much lighter wheel to be made cause the aluminum is compress plus it eliminates cavities or pores with in the aluminum so it maintains a stronger structure.
our M755 is built using this method .
The following users liked this post:
Tripjammer (08-31-2019)
#27
Supporting Vendor
Thread Starter
thats the goal, our current M755 that is built for C5/C6 and C7 corvettes accept C7 factory caps.
GM is usually good with maintaining same cap size for a few generations, we are in the works of obtaining proper factory cap sizing so the C8 guys can swap them in.
GM is usually good with maintaining same cap size for a few generations, we are in the works of obtaining proper factory cap sizing so the C8 guys can swap them in.
#29
Supporting Vendor
Thread Starter
#30
Supporting Vendor
Thread Starter
#31
Supporting Vendor
Thread Starter
#32
Congrats on becoming the first (to my knowledge) source for decent looking C8 wheels. The OEM offerings are very unattractive. I'd be ordering a set if I were ordering a C8.
The following users liked this post:
Carlos@mrrwheels (08-26-2019)
#33
sorry buddy thats something we can not currently disclosed, We have worked very hard to obtain proper information at a early time
and we would also hate to disclose any of our connects. but rest assure we will not be building containers full of new C8 corvette wheels and spending thousands of dollars to deliver a incorrect wheel.
and we would also hate to disclose any of our connects. but rest assure we will not be building containers full of new C8 corvette wheels and spending thousands of dollars to deliver a incorrect wheel.
#34
Supporting Vendor
Thread Starter
#35
Supporting Vendor
Thread Starter
we will make sure that your factory tires can be used and that they will not cause any rubbing issues.
our first initial set up will be a direct swap.
with future more aggressive set up's following after but this wont happen until we have a car here on the road with us.
as for announcing off sets we will not at this point.
#36
Supporting Vendor
Thread Starter
#37
Supporting Vendor
Thread Starter
Thank you guys for all that reached out to me via email, I tried to get through all of them but I know I have a few still in my unread folder.
Also a huge thank you for everyone that set up a Pre Order with us. we will keep this thread updated.
Remember guys we are offering early pre orders at a great price for M755 Flow Forged wheels so just email me at Carlos@mrrwheels.com or send me a PM.
Have a great weekend guys !! ill be back Monday.
Also a huge thank you for everyone that set up a Pre Order with us. we will keep this thread updated.
Remember guys we are offering early pre orders at a great price for M755 Flow Forged wheels so just email me at Carlos@mrrwheels.com or send me a PM.
Have a great weekend guys !! ill be back Monday.
The following 2 users liked this post by Carlos@mrrwheels:
Gabed1 (08-24-2019),
Stardompromo (08-24-2019)
#38
Pro
Carlos you need to get these configured to C8 as well!
The following 4 users liked this post by NoSoupForU:
The following users liked this post:
Carlos@mrrwheels (08-26-2019)
#40
Racer
please send me the pricing as well I don't like any of the OEM wheels especially the standard ones which I may have to get because the upgrades are not that much of an upgrade especially at the price